Just another Wilson Switch problem (1 Viewer)

[MiniPigg]

So the guy before me put something in that wasn't a Wilson switch. Not I going through the system to install one. I thought it was going to be simple but there are some things that don't make sense to me.
After I did all the work as soon as I turned the ignition on the glow plug relay on the fender turned on and stayed that way. So I went ahead and checked everything according to what my understanding and same issue.
Im just going to ask what wires of are on either wired coming from the switch? One post I read didn't mentioned the wire coming from the timer but then I didn't read where if was suppose to go.

 

[MiniPigg]

Anyone?

 

[MiniPigg]

Ok… I was trying to make it way to complicated. Small red wiring from round relay and ignition power. I was trying to figure out where the black w/orange strip wire went. And on one of the write ups made it sound like you put power on both wires coming from the switch. I do have 12VDC going to the glow plugs.