I built a homemade swing arm bumper for my 80 a while back and a friend who restored 40's talked me into using a latch system from an older Toyota. I am only guessing it came from a 40 series. The latch has preformed flawlessly over the many past off-roading years and am grateful for his advice. Now, I have recently bought a 100 series and want to build another swing arm bumper. I was hoping one of you fine Mudders would help me out by identifying the latch parts I used so that I can stick with a proven system. The three parts are the latch itself, the curled part that the latch grabs, and the rubber receiver part that holds it all. Here are the pics. Thanks for any help y'all can give me.