What Did You Do with Your 80 This Weekend? (75 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Tested them out on a short trip to an ORV area. Worked great and happy with my choice. Amazing what a locked up 80 can do. Now “Ruby” will get into terrain that makes me pucker. Need to do a longer trip and try them out some more. Will definitely head out in the local snow this winter.
 
Getting ready to drop back on the block!!!

BFBD74BB-5A5D-41E6-A9F5-CB03FCA54CDD.jpeg


77B616D2-C487-40A5-A008-A3A2D5965014.jpeg


FBFCBB00-903E-4E6D-A954-6E73DE5B6F52.jpeg


627255E3-684F-4552-B7ED-2CB1E8237C95.jpeg


4FAD095E-1F72-4FCB-A783-1F90821E6675.jpeg
 
Getting ready to drop back on the block!!!
This looks amazing ! What did you do to the engine ? and do you have a thread for this ?
 
Bunch of maintenance.
Oil filter. Oil change. Fuel filter. Air filter. Rotate tires.
And torqued the caliper bolts? 🧐
 
Tested them out on a short trip to an ORV area. Worked great and happy with my choice. Amazing what a locked up 80 can do. Now “Ruby” will get into terrain that makes me pucker. Need to do a longer trip and try them out some more. Will definitely head out in the local snow this winter.
Snow wheeling is my favorite wheeling. Post up when you go!
 
Discovered why it handled like a wet noodle on way home last weekend. Not any real “wheeling” either. Second time I’ve had one come out but now have a broken bolt to deal with as well :/

View attachment 3074327
What is the best way to remove that sheared bolt now? I have a couple in the same condition that I need to extract.
 
What is the best way to remove that sheared bolt now? I have a couple in the same condition that I need to extract.
It's pretty accessible under the frame there. Should be able to get an ez-out on to it with no issue.
 
Ya I put that in my build thread. They were tight. I removed them. Added loctite. Torqued. Torqued knuckle nuts too
You didn't get peer-pressured into buying new bolts? :worms:
 
What is the best way to remove that sheared bolt now? I have a couple in the same condition that I need to extract.
Mine was relatively new bolt and nutsert so center punch and a left hand drill bit worked for me.
 
Picked up this 92 it’s a bucket of bolts! Not sure if I should fix or part out. The body is a shotty repaint job and a reconstructed title. Wrong front grill. Interior is almost perfect, only 200k on motor it runs of drives ok I drove it home 120miles no
Problems sight unseen. Suspension is smoked,

4AD5424E-4B3B-48DA-B2BA-8E25809651B6.jpeg


274E1FBD-AA63-4F2F-BB9D-102A27CF9834.jpeg


5E3B961C-B40E-4DDF-A5C8-54AB3807388C.jpeg


500349EE-B567-4F03-AA05-CAB5122C8D0B.jpeg
 
I drove it home 120miles no
Problems sight unseen.

It's a 3fe, you could have gone 10,000 miles with no problems lol


But seriously...... part that thing out. I will take the seats off your hands.
 

Users who are viewing this thread

Back
Top Bottom