SOLD 2F Bellhousing (1 Viewer)

[ClemsonCruiser]

Location

United States

Hey everyone I’m in need of a 2F bellhousing. If you’ve got one shoot me a PM and let me know what you need for it.

Thanks
JP

 

[cppilot]

Hey there JP, I may have what you need ? Sending pm.

Mark

 

[3_puppies]

2 versions of 4 speed bellhousings that went with a 2F
not including the 3F bellhousing

 

[jkdur728]

I have both a early and late fj60 bell housing. let me know what you need. Located in VA.

 

[ClemsonCruiser]

2 versions of 4 speed bellhousings that went with a 2F
not including the 3F bellhousing

Hey Paul, curious what are the differences?

Thanks!

 

[cppilot]

Hey Paul, is this what JP needs?
Thanks

 

[cppilot]

Forgot to add photos….

 

[3_puppies]

Hey Paul, curious what are the differences?

Thanks!

the early version up to and including 1980 would be drilled and tapped for the bellhousing mounts
1981-1984 or 85 would not be drilled and tapped for the bellhousing mounts
the inspection cover is almost the same, there is 1 bolt in a different place

 

[wngrog]

Also the 40 one allow you to mount the clutch arm on either side. The 60 main hole is there but not one drilled for the pivot

 

[Bill92]

I have both a early and late fj60 bell housing. let me know what you need. Located in VA.

Do you have the one from an 85-up? The one that clocks the tranny at a slight angle?

 

[jkdur728]

I got a few if your still looking for one.