Builds DINGO- 60FZJ-UTE LS3 EROD (PROVEN CA SMOG) (2 Viewers)

[sschruff]

Not a lot. Since I'm not crawling this rig I'm not worried about the already upgraded 300M axles or HF2A tcase. Easy swap on the transmission for the new arriving 4L75E-R transmission from GM performance. TCM stays the same, Whipple swap is a few hours, already have plenty of fuel and space under the hood. Really a weekend with the new arriving parts and all good.

You are definitely killing me with all this crazy porn talk=)

Just sent u an email. . .

S

 

[White Stripe]

Not a lot. Since I'm not crawling this rig I'm not worried about the already upgraded 300M axles or HF2A tcase. Easy swap on the transmission for the new arriving 4L75E-R transmission from GM performance. TCM stays the same, Whipple swap is a few hours, already have plenty of fuel and space under the hood. Really a weekend with the new arriving parts and all good.

Oh ok. I don't know all the details of your swap. But it looks like it's turning out real nice. I've been trying to find out what parts gm is using for that new 4l75er, but can't find much.

 

[TRAIL TAILOR]

Oh ok. I don't know all the details of your swap. But it looks like it's turning out real nice. I've been trying to find out what parts gm is using for that new 4l75er, but can't find much.

It is the new transmission they developed to mate up to the new ZZ632 cubic inch 1000HP/875 ft #torque crate.

 

[TRAIL TAILOR]

New front coils and shocks installed. Overall a 6.25" lift over on the 37s.

I'll get to the rears next week.

J

 

[spressomon]

Are those your arms J? Or?

 

[TRAIL TAILOR]

New rear coils installed and bottom of trimmed rocker now sits right at 33". Gained about 1.5" in the rear with the taller and heavier coil.

Jason

 

[TRAIL TAILOR]

 

[TRAIL TAILOR]

About ready to go in with interior.

J

 

[GreyGooseFJ]

About ready to go in with interior.

J

View attachment 3092442View attachment 3092444

Big fan of your work and your posts on here. I'm looking at doing that to my interior soon. In your opinion, how does fat mat compare to like a lizard skin coating?

 

[tmxmotorsports]

Big fan of your work and your posts on here. I'm looking at doing that to my interior soon. In your opinion, how does fat mat compare to like a lizard skin coating?

Not discrediting any of those or J . Take a look at down 4 sound rilla mat. Can get it in a few different thickness and also with closed cell foam.

 

[tmxmotorsports]

Not discrediting any of those or J . Take a look at down 4 sound rilla mat. Can get it in a few different thickness and also with closed cell foam.

Pics

 

[TRAIL TAILOR]

Eve

Big fan of your work and your posts on here. I'm looking at doing that to my interior soon. In your opinion, how does fat mat compare to like a lizard skin coating?

Everyone is different on what they like. I layer my floors for sound and heat suspension. I don't submerge my rigs so I could care less about moisture. I want a quality heat and sound solution while looking and feeling cushy and being quiet.

Inner layer of sound deadner (rattle trap 80 mil or similar)
mid layer of Thermozite dual foil side insulation (22 oz weight)
carpet ( I use plush on my personal rigs) is nearly twice as thick as cut pile and a much nicer look and feel. (22 oz) Harder to work with but the results are exemplary compared to loop IMO.

I don't think there is a single layer solution that will match what I install.

Jason

 

[TRAIL TAILOR]

Genesis topcoat on Dingo today.

J

 

[TRAIL TAILOR]

Well I misplaced or used the good window regulators on another build..... @cruiseroutfit to the rescue for new OEM parts on the way. Thanks Kurt and Jason for the quick like a cat service.

Jason

 

[cruiseroutfit]

Well I misplaced or used the good window regulators on another build..... @cruiseroutfit to the rescue for new OEM parts on the way. Thanks Kurt and Jason for the quick like a cat service.

Jason

That machine is

 

[TRAIL TAILOR]

That machine is

A few @cruiseroutfit parts on my build. 4 years in the making and will be rolling hard in the next 30 days.

J

 

[TRAIL TAILOR]

Sliders on

J

 

[TRAIL TAILOR]

A few have asked--- The wheelbase on DINGO is 133.5"

Stock 60 is-- 107.5"
Stock 80 is-- 112.2"

Jason
TT

 

[TRAIL TAILOR]

A little more today. Deciding on winches now..

Installed bumper and Baja Designs squadron pros and LP-6 spots.

J

 

[pistonpete]

Getting close !