FJ55 Sliders (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

It would be nice is someone fabbed up some rockers from 3/16" plate to match the contour of stock. I've seen some in the past, but it's been a while
 
Yeh, I've got those IPOR rockers/sliders that are 1/4" thick if I remember right. I still wouldn't want to use them as sliders all the time. I'd rather have some dedicated sliders for the job.
 
I am partial to the 2x4 tube. The only issue is you have to address the moisture that will drop from the B pillar, and if you have rust on the outside you probably have it on the back wall too. Mine was rusted where the floor supports turned 90 and became a shelf for water and mud. This is what I did.
20210110_160437.jpg
20210207_184355.jpg
20210207_184412.jpg
20210221_110431.jpg
20210221_133518.jpg
 
@Megadoomer Those slider rocker combos are AWESOME!!!
 
OK, decided to do the right thing and replace the rockers. Called the metal mart, gasped when i heard the price, placed the order and dropped the other old slider.
Saw some old body damage i hadn't seen in 30 years, the first dent i ever put in it, really took me back...
Trying to think what should i do next

20220624_141542.jpg


20220624_141734.jpg


20220624_141814.jpg


20220624_142420.jpg
 
Some of us were lucky enough to score a set of heavy replacement rocker/sliders from @bobm.
 
Almost just like those. Love ‘em
CB1DD252-71C5-4155-AD84-457F0EC1ACC1.jpeg
765971CB-CD8F-46E1-93E1-445A34D70B7C.jpeg


4B79E58A-398D-4415-A43D-59326938F5D8.jpeg
 
Last edited:

Users who are viewing this thread

Back
Top Bottom