Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
@Delta VS rear spring retainers
Keeps the spring from popping out of the seat at full drop.Whats do these accomplish?
I got my White Knuckle sliders in the mail on Thursday. Had the sliders painted on Friday night and installed Saturday morning. Went out to Windrock on a trail ride after the slider install. I ended up with a small ding on the slider it held up well. However my paint job on the sliders is already flaking away. Will be sending them to linex here soon. View attachment 3025964
View attachment 3025965
View attachment 3025966
Built up a custom 80 base front axle housing.
New CNC 4130 CrMo knuckle balls., 3.5" x .375" wall DOM, all reproduced forge stamped brackets and 10.9 grade studs. 7 degrees of caster built in.
View attachment 3027143View attachment 3027144View attachment 3027145
Jason
Built up a custom 80 base front axle housing.
New CNC 4130 CrMo knuckle balls., 3.5" x .375" wall DOM, all reproduced forge stamped brackets and 10.9 grade studs. 7 degrees of caster built in.
View attachment 3027143View attachment 3027144View attachment 3027145
Jason
TBH that skeeves me out. Gas goes outside. Always.
So sweetBuilt up a custom 80 base front axle housing.
New CNC 4130 CrMo knuckle balls., 3.5" x .375" wall DOM, all reproduced forge stamped brackets and 10.9 grade studs. 7 degrees of caster built in.
View attachment 3027143View attachment 3027144View attachment 3027145
Jason
lspv delete, ABS pump delete, new extended brake lines installed. Just waiting on the new master cylinder than will bleed and test out the now functioning brakes.
View attachment 3027498
View attachment 3027499
Ruff stuff, the taller pair they offer. The lower shock mounts they sell are nice the way angle up to not catch on rocks when backing up or coming downWho's shock tower mounts did you use?
Man I know? I tested it and it specs out per the FSM. If they didn’t cost $800 I would have already ordered.I'd go ahead and replace that brake booster while your in there. Looks like it has seen better days.