Manual gbox thoughts (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 8, 2011
Threads
277
Messages
1,602
Location
Toronto, NSW, Australia
I have a very nice h150f with the 1hz in my 80. Later 80's (and most turbo ones I think) got the h151f. The current 7x series have a h152f. I've never considered it before, but will the h152f bolt up to motors and mount into an 80? I'm aware that the h150f and h151f have a different input spline config so h152f is probably the same as h151f in that regard.
 
I have a very nice h150f with the 1hz in my 80. Later 80's (and most turbo ones I think) got the h151f. The current 7x series have a h152f. I've never considered it before, but will the h152f bolt up to motors and mount into an 80? I'm aware that the h150f and h151f have a different input spline config so h152f is probably the same as h151f in that regard.

No. Different spines/shaft and bellhousing on the H152
 
Ah ok thanks.
 

Users who are viewing this thread

Back
Top Bottom