greynolds
SILVER Star
That new product sounds like a good idea, but is of zero interest to me since I have a Heritage Edition and don't (yet, at least) have a drawer system.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I’ll try one if no one has chimed inthe 2016+ batch is now a month late... last promise was they'd be delivered last week, but now that's been upgraded to "might ship this week..." likely the last time this shop does these. I have a different shop making the 2008-15 versions which should arrive by Friday, these guys are much more on it so I actually believe that will happen... appreciate everyone's patience here!
In other news my other "new" part came in finally for the 200... I still need to build out a web page on this one but will go ahead and share some pics/get your feedback. It's a 3rd row seat latch accessory mount. Intended for use on any non-Heritage 200 Land Cruiser with the 3rd row seats removed and a drawer system added. You're using the latch in the wall, and the handle, to lock in/remove this little bracket onto which you can mount a variety of small accessories, like a first aid kit, flashlight, small case, fire extinguisher, etc. The idea is you put something on there you might want access to in a hurry, as all you need to do is pull the relesase lever and it pops out.
I've had a prototype of this installed for the past couple months, so far so good. Here are the pics of the first production version:
View attachment 2972453
View attachment 2972454
View attachment 2972455
View attachment 2972456
View attachment 2972457
I put a hole pattern in it for the Quickfist Ratchet clamp, which I really like using for fire extinguishers, also some slots you can weave webbing through, I will tweak those a little on the next batch to provide more options. You can also do normal Quickfist clamps easily, or whatever else you have in mind, if you can drill a hole you should be able to be successful here. On my rig I'm running both a first aid kit & fire extinguisher on the left, and I'm going to mount a "bathroom bag" to the one on the right, which is more tucked behind the fridge. Anyone want to try one? I'll send one to the first person who meets all of the qualifications; 1. you actually read this entire post, and 2. you have a Land Cruiser with 3rd row seats & a drawer system & want to try this out, and 3. you post up the words "yeah I'll try one thanks!"
Just confirming you don't have the latch, or the hole in the wall for the seat correct? That's my assumption since yours didn't come with 3rd row seats, I'm still waiting for the next HE to roll through to verify myself.That new product sounds like a good idea, but is of zero interest to me since I have a Heritage Edition and don't (yet, at least) have a drawer system.
Cool, now I'm bummed out that I removed those latches and releases.the 2016+ batch is now a month late... last promise was they'd be delivered last week, but now that's been upgraded to "might ship this week..." likely the last time this shop does these. I have a different shop making the 2008-15 versions which should arrive by Friday, these guys are much more on it so I actually believe that will happen... appreciate everyone's patience here!
In other news my other "new" part came in finally for the 200... I still need to build out a web page on this one but will go ahead and share some pics/get your feedback. It's a 3rd row seat latch accessory mount. Intended for use on any non-Heritage 200 Land Cruiser with the 3rd row seats removed and a drawer system added. You're using the latch in the wall, and the handle, to lock in/remove this little bracket onto which you can mount a variety of small accessories, like a first aid kit, flashlight, small case, fire extinguisher, etc. The idea is you put something on there you might want access to in a hurry, as all you need to do is pull the relesase lever and it pops out.
I've had a prototype of this installed for the past couple months, so far so good. Here are the pics of the first production version:
View attachment 2972453
View attachment 2972454
View attachment 2972455
View attachment 2972456
View attachment 2972457
I put a hole pattern in it for the Quickfist Ratchet clamp, which I really like using for fire extinguishers, also some slots you can weave webbing through, I will tweak those a little on the next batch to provide more options. You can also do normal Quickfist clamps easily, or whatever else you have in mind, if you can drill a hole you should be able to be successful here. On my rig I'm running both a first aid kit & fire extinguisher on the left, and I'm going to mount a "bathroom bag" to the one on the right, which is more tucked behind the fridge. Anyone want to try one? I'll send one to the first person who meets all of the qualifications; 1. you actually read this entire post, and 2. you have a Land Cruiser with 3rd row seats & a drawer system & want to try this out, and 3. you post up the words "yeah I'll try one thanks!"
Alright we have a winner! that was easy. and yes, I'll be sure to post up when the batch comes in for the dash mounts, thanks!I’ll try one if no one has chimed in
I also need to purchase the dash mount for an 08 when you get the new batch in
I have a feeling our friends down in Golden, Co have a stash of those... as it's been common to swap those out for the other bits when they add drawers. you might ask them, next time you're loading up on other Slee goodies?Cool, now I'm bummed out that I removed those latches and releases.
Let me know how it works out. I have 2018 with ArB drawers but am installing Kaon full molle. Going to mount those first and then watch the thread to see your set up. Great idea. Think it’s an easier access than the window molle. Especially for lifted rigs.I have a feeling our friends down in Golden, Co have a stash of those... as it's been common to swap those out for the other bits when they add drawers. you might ask them, next time you're loading up on other Slee goodies?
Correct, the latches, holes, threaded inserts, etc. for the third row seats are all missing. So mounting points for fastening down drawer units are limited to the bolts for the 4 cargo tie downs. One plus is that by not having the latches, there’s a blank panel that’s handy for mounting power outlets.Just confirming you don't have the latch, or the hole in the wall for the seat correct? That's my assumption since yours didn't come with 3rd row seats, I'm still waiting for the next HE to roll through to verify myself.
Thanks. I'm a packrat and have my original panels, latches and levers. I just pulled that out and put Bluesea power plugs there. They have such great utility that I'm not going back. Good idea though!I have a feeling our friends down in Golden, Co have a stash of those... as it's been common to swap those out for the other bits when they add drawers. you might ask them, next time you're loading up on other Slee goodies?
Sorry I'm late to the party on this thread. So the angle higher version is dead and we're waiting on a newer prototype for 16+ lc? Also what do you guys think about a raptor lining rather than a powder coat? I think the textured look would work better with the dash. Any thoughts on that?
the 2016+ batch is now a month late... last promise was they'd be delivered last week, but now that's been upgraded to "might ship this week..." likely the last time this shop does these. I have a different shop making the 2008-15 versions which should arrive by Friday, these guys are much more on it so I actually believe that will happen... appreciate everyone's patience here!
In other news my other "new" part came in finally for the 200... I still need to build out a web page on this one but will go ahead and share some pics/get your feedback. It's a 3rd row seat latch accessory mount. Intended for use on any non-Heritage 200 Land Cruiser with the 3rd row seats removed and a drawer system added. You're using the latch in the wall, and the handle, to lock in/remove this little bracket onto which you can mount a variety of small accessories, like a first aid kit, flashlight, small case, fire extinguisher, etc. The idea is you put something on there you might want access to in a hurry, as all you need to do is pull the relesase lever and it pops out.
I've had a prototype of this installed for the past couple months, so far so good. Here are the pics of the first production version:
View attachment 2972453
View attachment 2972454
View attachment 2972455
View attachment 2972456
View attachment 2972457
I put a hole pattern in it for the Quickfist Ratchet clamp, which I really like using for fire extinguishers, also some slots you can weave webbing through, I will tweak those a little on the next batch to provide more options. You can also do normal Quickfist clamps easily, or whatever else you have in mind, if you can drill a hole you should be able to be successful here. On my rig I'm running both a first aid kit & fire extinguisher on the left, and I'm going to mount a "bathroom bag" to the one on the right, which is more tucked behind the fridge. Anyone want to try one? I'll send one to the first person who meets all of the qualifications; 1. you actually read this entire post, and 2. you have a Land Cruiser with 3rd row seats & a drawer system & want to try this out, and 3. you post up the words "yeah I'll try one thanks!"
yeah we're resolving it... I am going to give these guys a lot less to work on moving foward, to free up a little bandwidth. I hope to have the 16+ versions next week now, each week I'm told "next week..." last time these guys make this one.Bummer about the vendor issue. Hope it gets resolved soon.
Success!
Four usb ports (switched via switchpros), three movable (and removable) ball mounts. One GPS antenna.
Thanks @nakman , another excellent product.
Hope to install my Gamiviti expedition rack today if I can convince my son to help with lifting.
View attachment 2975990
Another small vendor product I'm trying out is this mic clip from Expedition Essentials. It mounts on a Ram ball, so there are nearly infinite options for where to put it.
View attachment 2976008