#6 White to brown bodywork and paint (Tatonka) (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Rust in the door jamb seam, bubbling from under the seam sealer.

image.jpg
 
Gas door opening is caved in from a previous accident. I can’t get it to stay after I stretch it out from the inside, so I’m making a bracket to hold it. I will attach it to the inside.

image.jpg
 
What brand filler do you use?
Shop brand called Vitech. It’s my favorite. I’m sure it’s made by someone else though, probably something high-end like Rage Gold or something.
 
What gauge sheet metal do you use for patch work?
 
This one had Ben rust proofed previously. The stuff did a fine job in the rockers. It’s a wax type spray in goop, and it was still packed in the corner, and still soft and sticky. I will clean this up and weld it back on. The other side shows signs of rust, so it might be a different story.

E9A37041-47B1-4DEF-81F2-5B8524B7F97F.jpeg
 

Users who are viewing this thread

Back
Top Bottom