What Did You Do with Your 80 This Weekend? (88 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Went out for a day in the Idaho backcountry.

6AD4486C-7BBC-4473-954D-80D9AA4A100D.jpeg
009D04FC-489D-477B-9632-32476C0208DC.jpeg
3338024B-63C9-4D12-AC47-0F501C1DD51B.jpeg
3FE236C3-197B-406A-B4D6-191B50211994.jpeg


Cheers
 
Always pack a chainsaw. Daniel boone national forrest backwoods. Capable rigs and guys down with Hood rat chit @smittycrusher

8D7AAF71-54A0-42A8-A9AB-23E21234316E.png
 
Took a drive up to Boise to go see Dave @Delta VS and pickup this SWEET center console and shifter console.

The R&D that went into these pieces is top notch work and the products are amazing. Having a proper place to rest your right elbow makes driving long distance so much more comfortable. I did 350 miles back down into UT last night and found the drive much more relaxing since I am sitting with a better more balanced posture.

1st pic is just of the LX in its natural habitat next to a giant Oshkosh.
1D010E00-7B48-499D-9F5B-31949D5E8E90.jpeg
BDA17A94-C99B-409E-88FA-0BDA11354B93.jpeg
3AF5CF21-7FF2-4A03-8281-6EE0144AE26A.jpeg
12269E01-BE55-4AA0-A6CA-1951E67E73AF.jpeg
7E5A53F1-B137-44E5-B9F6-C302C28F89CA.jpeg
 
Didn’t see a dip in the pismo sand dunes And hit it pretty hard, Everything seems street so not sure why my steering wheel is way off center now.
View attachment 2124318
Your wheels might be out of alignment. Hard to do on an 80 but it can happen from a hard hit.
 
Any chance you could measure how far the arb steps stick out from the body using the rocker pinch weld as a point of measurement? Nice cruisers by the way!

Sure. It sticks out about 10 inches from the pinch weld.

9A03E0C7-F4DA-47FE-83D8-2545294AB3C4.jpeg
3322E7E3-D8C9-4582-AA3E-B8D96BBB5B31.jpeg
26B5C7C7-5FBD-4EE3-B2BE-391344C9DEBB.jpeg
 
Didn’t see a dip in the pismo sand dunes And hit it pretty hard, Everything seems street so not sure why my steering wheel is way off center now.
View attachment 2124318

Since it is to the right like that, it means the relay rod is too short... ie... may have got bent. Try lengthening the relay rod and see if that fixes it.
 

Users who are viewing this thread

Back
Top Bottom