Official ONSC member buying/selling thread (42 Viewers)

[Spencer Leger]

*few not dew haha. I'd never let a mountain dew get away

 

[JohnVee]

This thing looks crazy. It runs only on propane.

79 Toyota For sale - Auto Parts - Archer Lodge, North Carolina - Marketplace | Facebook

Also, still in the market for an 80 Series. I was foolish and let weejub's get away lol. Since then I've been close to buying a dew, but they've either been in bad shape or someone's beat me to it. I'm no rush, just checking!

Check the VA - CCLC clubhouse FOR SALE thread. I think one came up yesterday or today.

 

[Spencer Leger]

Check the VA - CCLC clubhouse FOR SALE thread. I think one came up yesterday or today.

Thanks for the tip. All I saw recently was a Chevy truck and an fj40.

 

[GarnerFJ40]

This thing looks crazy. It runs only on propane.

79 Toyota For sale - Auto Parts - Archer Lodge, North Carolina - Marketplace | Facebook

Also, still in the market for an 80 Series. I was foolish and let weejub's get away lol. Since then I've been close to buying a dew, but they've either been in bad shape or someone's beat me to it. I'm no rush, just checking!

Must be something about that area. That's the town where my Pig came from...

 

[Greenbean]

I have a 16" spare tire off the Tacoma - steel wheel. Good shape - tire is a stock K01 that is in pretty bad shape. FREE - going to local reseller if not needed

Is the spare from a Gen1 or Gen2 Taco?

 

[weejub]

Gen 1

 

[Greenbean]

Exactly what Im needing. PM respon ded too,

Anyone close to Asheville going that way? I'll buy you some beer of choice if you can ride this wheel/tire a little closer to Asheville.

 

[forrest5000]

Exactly what Im needing. PM respon ded too,

Anyone close to Asheville going that way? I'll buy you some beer of choice if you can ride this wheel/tire a little closer to Asheville.

If he can get it to the Christmas party, I can get it up your way .

 

[Greenbean]

If he can get it to the Christmas party, I can get it up your way .

10-4, we shall try!

Thanks...

 

[Greenbean]

Thought I would pass on what I think is a good deal,

I’ve been wanting reversible GearWrenches for years after really loving my flat metric set I’ve had for almost 15 years now. The reversible ones have a 15” offset head.

Found sets 9543 and 9533N at Tractor Supply for 29.99 each. Cheapest on Amazon is 47.00

Didn’t know if anyone was looking for something like this.

Set 9543 is
8,10,12,13,14,15,17 & 19mm

Set 9533N is
5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, & 3/4.

Obviously I won’t use the SAE much but my mowers need em, lol...

 

[weejub]

If he can get it to the Christmas party, I can get it up your way .

Breakfast went fast this AM - full house tonight. If Bfast goes that fast tomorrow, hoping to run down to the Barn, but gotta be back in time for Son's concert at State in the PM.

 

[jynx]

Thought I would pass on what I think is a good deal,

I’ve been wanting reversible GearWrenches for years after really loving my flat metric set I’ve had for almost 15 years now. The reversible ones have a 15” offset head.

Found sets 9543 and 9533N at Tractor Supply for 29.99 each. Cheapest on Amazon is 47.00

Didn’t know if anyone was looking for something like this.

Set 9543 is
8,10,12,13,14,15,17 & 19mm

Set 9533N is
5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, & 3/4.

Obviously I won’t use the SAE much but my mowers need em, lol...

Pit stop tomorrow while running errands. Thanks

 

[S4Cruiser]

FJ 40 roll bar

Nice price. Has pads too!

 

[ncrockinfj]

2003 w/ ARB Front and Slee Sliders I know nothing about Capital City Auto and have not seen this in person.

 

[weejub]

Custom 74' FJ40 Toyota Land Cruiser

This '74 FJ40 went from $10.5K from owner to a dealer, now $13K:

1974 Toyota Land Cruiser 4wd, , 2 Door Sport Utility, 350 cid V8 Engin

 

[BMThiker]

Thought I would pass on what I think is a good deal,

I’ve been wanting reversible GearWrenches for years after really loving my flat metric set I’ve had for almost 15 years now. The reversible ones have a 15” offset head.

Found sets 9543 and 9533N at Tractor Supply for 29.99 each. Cheapest on Amazon is 47.00

Didn’t know if anyone was looking for something like this.

Set 9543 is
8,10,12,13,14,15,17 & 19mm

Set 9533N is
5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, & 3/4.

Obviously I won’t use the SAE much but my mowers need em, lol...

Great deal! I have the flats without the reverse switch (flip the wrench) and have needed the switchable kind for specific spots. Thanks for the heads up.

 

[jfz80]

Great deal! I have the flats without the reverse switch (flip the wrench) and have needed the switchable kind for specific spots. Thanks for the heads up.

Ever had to cut a brand new gear wrench in pieces because of those spots? Yeah the reverse is nice

 

[BMThiker]

I've come damn close to having to.

 

[GLTHFJ60]

In the midst of an intense "winter cleaning" session for my garage. Have these three ammo cans I used to use all the time, and have been holding onto them for a few years for no reason. Time to purge.

Cost: Some beer. Surprise me. These aren't worth much, so don't go too crazy.
Catch: Must be gone before Dec 21st

 

[ROBsSON]

In the midst of an intense "winter cleaning" session for my garage. Have these three ammo cans I used to use all the time, and have been holding onto them for a few years for no reason. Time to purge.

Cost: Some beer. Surprise me. These aren't worth much, so don't go too crazy.
Catch: Must be gone before Dec 21st

View attachment 1847054 View attachment 1847055 View attachment 1847056 View attachment 1847057

I’ll bring you some beer or some other goodies for a lathe. You pick.