Needed- Good 4.10 8” third member (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Dumpolina

SILVER Star
Joined
Nov 12, 2006
Threads
120
Messages
1,698
Location
Albuquerque
8C89D426-999A-47C6-9309-35DB99296E49.jpeg
’cause this happened last week.
Anyone in Alb Los Lunas Santa Fe area have one? Must be 4.10
$100
 
Well, that is below average. Which truck is that?
 
Damn!
 
I belief I have a 4.10 ring and pinion gear set that came out of a 8" Tundra third. 40.00 if you want it. I am um in the Jemez.
 
That's no bueno.
 
Well, that is below average. Which truck is that?

Its on Steve H's Samurai. @marcfj60 I feel responsible, my spotting was no bueno.
And he won't be snow wheeling until its fixed so trying to get him a solution sooner than later.

 
Pretty cool he beefed up his Suzuki with Toyota parts.
 
Still looking for one
 
I have a third member from my '01 Tacoma that has 8 inch ring gear, 4.10 gears, and 2 pinion open diff. Gears seem fine, but bearings might need replacing. Code on door jamb is "B03A". Will this work for you?
 
I have a third member from my '01 Tacoma that has 8 inch ring gear, 4.10 gears, and 2 pinion open diff. Gears seem fine, but bearings might need replacing. Code on door jamb is "B03A". Will this work for you?

Barry, thanks I don't think this will work though...
According to LC Engineering Diff page (LC ENGINEERING Differential Tech)
"This diff cannot be fitted to an older style 8" axle because it uses a larger diameter mounting bolt pattern and because more space inside the housing necessary to accommodate the large bearing cap"

The hunt continues!
 

Users who are viewing this thread

Back
Top Bottom