EGR Temp Sensor Test Plug (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Back in stock. I have about 10 of each ready to go.
IMG_3871.JPG
 
Still got any for a 97?
 
Did you ever put something together for the 91/92 3fe?
 
krs2fur said:
Did you ever put something together for the 91/92 3fe?
Click to expand...

I have plugs for both OBDI and OBDII engines and that covers 93-97. I don't think you have to worry about it on the 3fe, but I am not completely familiar with the EGR and monitoring setup on that engine so I would recommend you double check.
 
I've been entertaining the thought of an egr delete. Is this an alternative to an egr delete that yields the same result?
 
Last edited:
This plug allows you to disable the EGR system without causing the ECM to throw a code. The plug gives the ECM the value it looks for preventing the code. You will still need to block or plug a few vacuum lines to completely disable the EGR system.
 
apeterson said:
so should a person just try to use this plug first, if it comes back then you have to plug some lines on EGR? or just plug them? got a picture of what to plug on a 97?
Click to expand...

The code shouldn't come back with this in place, but that doesn't mean that another part of the EGR system isn't still allowing the exhaust gas to recirculate into the intake.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom