axles? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

What? Front and rear axles are not interchangeable whatsoever.
 
Wait, I can’t use the front shafts in the back?

May be different on a full-float rear end, but the F and R shafts on a standard, US spec FJ60 are not interchangeable.

Rears have the hubs permanently attached and are cut for C-clips on the diff side... fronts are shorter, splined on both ends, no C-clip at the diff, and pop into the birfields on the outer end.

Edit: (unless you were being facetious...then, my bad)

- Brian
 
May be different on a full-float rear end, but the F and R shafts on a standard, US spec FJ60 are not interchangeable.

Rears have the hubs permanently attached and are cut for C-clips on the diff side... fronts are shorter, splined on both ends, no C-clip at the diff, and pop into the birfields on the outer end.

Edit: (unless you were being facetious...then, my bad)

- Brian

I was joking.. good on you for sharing info though!
 

Users who are viewing this thread

Back
Top Bottom