1” spacer front, 2” spacer rear (1 Viewer)

[Jgunner]

i have icon springs, but after bumpers i could use a little more lift. Wanting 1” front 2” rear, is there anything out there that is not poly?

Meteltech makes a 1.5” front, but i feel its too high.

Any help is appreciated.

 

[Tools R Us]

Prefer swapping to the correct height springs instead of band-aiding it. That said, the front is easy, we weld a spacer into the cone mount, within reason, can be any height. The rear is more of a challenge, needs to be machined.

 

[cybrstar]

I play around with spacers all day. Use what you need to level it out. Right now on my rig I have:

Driver front 30mm/10mm
Passenger front 20mm/20mm
On OMe front 418’s
Rear 30mm
On 850j’s

I bought my spring pads from eBay for $25 each.

 

[Jgunner]

Prefer swapping to the correct height springs instead of band-aiding it. That said, the front is easy, we weld a spacer into the cone mount, within reason, can be any height. The rear is more of a challenge, needs to be machined.

Icon only makes these springs, i like progressive rates for ride.

Thanks for the advice on the front, that sounds easy.

 

[Jgunner]

I play around with spacers all day. Use what you need to level it out. Right now on my rig I have:

Driver front 30mm/10mm
Passenger front 20mm/20mm
On OMe front 418’s
Rear 30mm
On 850j’s

I bought my spring pads from eBay for $25 each.

Are they poly? I guess poly would be ok in the rear.

Maybe i should step up to dobbins and sell these. Or coilovers lol.