1 stall build up comes to the Booty Barn (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

030B6A94-B277-4E28-A303-C8A7C1996B7E.jpeg
One thing that was missing on the truck was a radiator shroud. Since it has an afternarket aluminum radiator, I turned to Summit for the best fit. A universal anything requires some modifications.....
This was the best size/fit available.
It was a little wide and the ends were made shorter than the top and bottom
 
F5A25EA3-AED3-4A69-94E1-4402DC99E2D8.jpeg
2BE7B941-1E38-4482-A6D1-8C094D71EAD9.jpeg
D0700F75-AFEA-441F-A551-A6261C43A4FF.jpeg
BBBC2F53-D166-409D-98CC-03528A807D34.jpeg

A nip and tuck, broke the ends back and added a piece of angle to give a mounting plate
 
8A5D2567-4034-4F38-93E5-FA373912BCE9.jpeg

Next, layout the fan....clearance is an issue, so the fan is top justified. Note the “p” for passenger & “d” for driver...I’m old and forgetful.
 
05F485DA-DE54-432A-A1BA-AEECCFA1257A.jpeg
8A1FA986-2564-4C27-AD5D-4CAD43AD91ED.jpeg
79D71AC1-9167-470E-980D-4D5B7CD3C294.jpeg

Cut the circle free hand with a grinder....came out ok.
Added some rubber edging to give a nicer finished opening.
 
89531AC3-34F9-4BE5-B0C0-20617158809B.jpeg
The fan needed to be recessed in the shroud for clearance.....All came together with 1-1/2” to spare.
Lesson learned on this phase.....electric fan comes with zero anything. I wanted the 3000cfm so all the mounts, wiring and relays are up to me.
 
C3FFFB48-FE5E-4137-B620-3A7DB837DE2B.jpeg

Cooper is doing his pretrip once over on the mini. He says I’m hogging the garage
 
I did not get it ready for Round Up. Here are a few shots working the suspension to get accurate measurements for the drive shafts.
help of a forklift.JPG

Front end lifted and strapped
Articulate.jpg

rear end lifted
Articulate with strap.jpg

rear end lifted and strapped to the stops
 
I'm sure I've asked this before, but what did Stockton charge you for those wheels? I assume you provided donors?
 

Users who are viewing this thread

Back
Top Bottom