AC pulley bearing part number (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 7, 2010
Threads
44
Messages
109
Location
Remember the Alamo!
2001 LX 470 with rear AC.
Does anyone know the bearing number and original manufacturer of the AC bearing? If not I will take the pulley off to find out, but I would like to risk breaking or distorting the clip only the once. Of course, a part number for the clip would be great too. MegaZip says 90099-07065 for the clip, but Toyota parts sites say it won't fit.

Thanks
 
Last edited:
Check out the following link.

The bearing is NACHI but hard to find it. I once went with a Chinese bearing and it was junk! Don't buy it, lasted about 3000 miles.

The Japanese bearing is about $50 on ebay.
Diamentions
ID: 30 mm
OD: 52 mm
Depth: 22 mm

You don't have to remove the AC compressor off the engine to do this job. I had an extra compressor so I did this thread.

I never replaced the clip so if you want to remove it, go ahead.

Toyota Denso AC Compressor bearing and Idler bearing replacement - Toyota 4Runner Forum - Largest 4Runner Forum
 

Users who are viewing this thread

Back
Top Bottom