13bt into a 60 series and no heat ? (1 Viewer)

[neetu]

Does anyone have the drawings for the heater hoses routing on a 13bt, its in a 60 series . I can't seem to get any heat in the interior of the vehicle .

 

[roscoFJ73]

Two things spring to mind. Is the thermostat good? Is the heater matrix blocked?
If so, a back flush with the garden hose will usually fix it.
Can you see the cables working the on/off valve?

 

[neetu]

The thermo checks out good and there seems to be no blockage .
I dont think i have the coolant hoses routed correctly on the engine itself .

 

[neetu]

Can anybody with a 13BT in a 60 series post a couple pic's ? I can get an idea on where the 2 hard coolants pipes go to/from . These are ones that come off the water pump. Thanks

 

[roscoFJ73]

A 3B or 13BT in a 7* series would be the same. If you ran it with the heater hoses disconnected, one would have coolant coming out. That would be the inlet and go to the heater valve normally