Greasing Your Vehicle (1 Viewer)

[DaveJG]

Anyone have any specific grease they use for greasing they’re drive shafts or any other lubrication points?

And how often do you usually re-grease everything, especially doing a service on your hubs?

 

[mmajsw]

I use a moly based grease and do the U-joints and driveshaft at every oil change. Adds less than 5 mins to the routine. Cheap insurance.
Hubs are every 25K miles or 2 years. Includes changing the inner axle oil seal

 

[FireJeep]

Not sure what Jeep you have, but on my 05 LJ there are no hubs....... the front wheel bearings get re-packed every other year unless I am off roading a lot. I use a synthetic marine grease on everything, front end, drive shafts, etc. and have had pretty good luck with it. 108,000 miles and still running the stock steering components, drive shafts/ujoints, etc.

 

[carlthomas]

I prefer to use moly based grease in such situations. It is helpful