Clutch flywheel bolts (1 Viewer)

[garrett goodwin]

Looking for the size of bolt for the clutch flywheel on an 82 fj60. Thanks

 

[4Cruisers]

Recommend OEM for these critical bolts:

90913-01016

 

[Jaric00n]

yeah, you don't want that huge frisbee coming through the floor

=3

 

[garrett goodwin]

Recommend OEM for these critical bolts:

90913-01016

Most definitely. I'm switching over to a 3fe and I need the holes drilled out but can't find the bolts at the moment and was hoping someone could help me so I know what size to make them

 

[4Cruisers]

Most definitely. I'm switching over to a 3fe and I need the holes drilled out but can't find the bolts at the moment and was hoping someone could help me so I know what size to make them

So you're installing a 3FE from a later FJ62 or from an FJ80, right? The early 3FEs use the same diameter (10mm) flywheel bolts as the FJ60s. The later 3FEs used 11mm bolts.

Early vs. late 3FE flywheel set bolt change details:

Toyota Service Bulletin dated 10-05-90

The length and diameter of the flywheel set bolt has changed. This results in changes to the crankshaft and drive plate as well.

Starting with:

Production Date October 1989

VIN JT3FJ62G*L1186060

Engine No. 3F-250226

The new short block assembly part number is 11400–61121 (was 11400–61120)

 

[garrett goodwin]

Awesome. That's what I was needing. It's definitely the later year as the bolts don't fit through the holes currently.