This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Those lengths are pro what?
@DylanICON wrote them in the 80 new territory shock thread... starting looking around the 5th page.
They are very close to the OME L shocks.
@DylanICON wrote them in the 80 new territory shock thread... starting looking around the 5th page.
They are very close to the OME L shocks.
Overall length can be compensated for, more important what is the Icon shocks travel in inches?
80 shock thread - familiar territory could use update
2.0 IFP 0-3" lifts
56509 2.0 IFP front 15.35 / 26.17 10.82 stroke
56510 2.0 IFP rear 15.60 / 25.67 10.07 stroke
Just for reference Ls are 15.25 to 26.5 11.25 stroke.
the longer 2.0 IFP 4-6" lifts are:
56511 front 16.850 / 28.170" - 11.32 stroke
56512 rear 16.850 / 27.420" - 10.57 stroke
these would require bump stop spacers.
2.0 IFP 0-3" lifts
56509 2.0 IFP front 15.35 / 26.17 10.82 stroke
56510 2.0 IFP rear 15.60 / 25.67 10.07 stroke
Just for reference Ls are 15.25 to 26.5 11.25 stroke.
the longer 2.0 IFP 4-6" lifts are:
56511 front 16.850 / 28.170" - 11.32 stroke
56512 rear 16.850 / 27.420" - 10.57 stroke
these would require bump stop spacers.
Last edited:
Are these the shocks that come with the shorter slinky lifts?
Those are off the shelf shocks from Icon.
Ok. Is there any place to find the shock lengths/specs for the shocks that come in the 50mm and 75mm slinky lifts? I've been told that the shocks in the 50mm lift are shorter but I don't know the lengths of either one!
Since my AutoCraft 75mm Slinky spec front shocks are actually revalved 56511s I would assume that the 50mm stuff would be the 56509 & 56510. But you would need to get with Justin @RLMS or Dylan @DylanICON or Darren @AutoCraft Aus to confirm these allegations.
Got it. So, for the 75mm lift, the kit supplies a 10" travel shock that extends to roughly 26".
What is the inside diameter of the mounting holes on the 56510, 56511 & 56512?
