What Did You Do with Your 80 This Weekend? (56 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Tough Dog order arrived.

TourFlex 80 rear springs (medium and heavy) Fronts are almost finished and should ship next week.

3 types of steering dampners-- standard, 9 stage adjustable, and RTC (return to center)

2" and 3" light, medium and heavy kits.

TourFlex and RED and Tough Dog regular springs are GOLD.

J

IMG_20170324_114250671.jpg
IMG_20170324_100759444.jpg


Superflex SS braided brake lines
IMG_20170324_115050172.jpg


Steering dampners
IMG_20170324_120131671.jpg


TourFlex Rears
IMG_20170324_114143105.jpg
 
Last edited:
Changed engine, tranny, transfer, and F & R differential oil. Also put in my spare tire levelling kit after going from 315 Duratracs to 295 Cooper AT3s so I can keep a spare without getting a rear bumper. I lost a bit of clearance but the Coopers are great on the road.



View attachment 1427436


View attachment 1427438



This shot is pre-tire leveling kit - now the spare is above the level of the hitch : )
View attachment 1427439

View attachment 1427440

View attachment 1427437
 
Changed engine, tranny, transfer, and F & R differential oil. Also put in my spare tire levelling kit after going from 315 Duratracs to 295 Cooper AT3s so I can keep a spare without getting a rear bumper. I lost a bit of clearance but the Coopers are great on the road.



View attachment 1427436


View attachment 1427438



This shot is pre-tire leveling kit - now the spare is above the level of the hitch : )
View attachment 1427439

View attachment 1427440

View attachment 1427437
Would love to see at picture tire leveling kit installed. Been thinking about buying one
 
Tough Dog order arrived.

TourFlex 80 rear springs (medium and heavy) Fronts are almost finished and should ship next week.

3 types of steering dampners-- standard, 9 stage adjustable, and RTC (return to center)

2" and 3" light, medium and heavy kits.

J

View attachment 1427467 View attachment 1427468

Superflex SS braided brake lines
View attachment 1427469

Steering dampners View attachment 1427470

TourFlex Rears View attachment 1427472
The adjustable damper is awesome, highly rate it. The 9 stage shocks on the other hand...:poop:
IMG_20150306_165437.jpg
IMG_20150108_180109.jpg
 
Installed these up front to replace my broken factory speakers:

Pioneer TS-F1634R 6.5" 200W 2-Way Speakers Amazon.com: Pioneer TS-F1634R 6.5" 200W 2-Way Speakers: Car Electronics

Used this to deaden the sound:

Noico 80 mil 18 sqft car Sound deadening mat, butyl automotive Sound Deadener, audio Noise Insulation and dampening Amazon.com: Noico 80 mil 18 sqft car Sound deadening mat, butyl automotive Sound Deadener, audio Noise Insulation and dampening: Automotive

Took less than an hour and came out great.

Also installed the Cabelas bucket seat covers up front and bench in back.
 
@232nuke I'll snap a photo tomorrow. I'm impressed with the added clearance
 
Installed these up front to replace my broken factory speakers:

Pioneer TS-F1634R 6.5" 200W 2-Way Speakers Amazon.com: Pioneer TS-F1634R 6.5" 200W 2-Way Speakers: Car Electronics

Used this to deaden the sound:

Noico 80 mil 18 sqft car Sound deadening mat, butyl automotive Sound Deadener, audio Noise Insulation and dampening Amazon.com: Noico 80 mil 18 sqft car Sound deadening mat, butyl automotive Sound Deadener, audio Noise Insulation and dampening: Automotive

Took less than an hour and came out great.

Also installed the Cabelas bucket seat covers up front and bench in back.

How did the Cabela's seat covers go on? Have any photos?? Thanks!
 
Making some progress. Finally got all the armor off, finished cleaning up some wiring. Pulling out the 3rd members this weekend to have them regeared to 5.29s.
IMG_20170324_191803_015.jpg
#CentralCoastLandCruisers
 
New dizzy cap,rotor,o-ring
replaced the alternator with a new to me unit.
Found a bad ground lug and replaced
IMG_0676.JPG
 
OG black hub clutch mod...Summer's coming!
2017-03-24 14.05.07-2.jpg
 
Finished my 2nd birf overhaul but this time added Aisin HD part time hubs, Trail Gear spindle lock nuts and the infamous 30lb spindle nut torque mod. Torqued all my steering arm studs to 60lbs (quite a few were loose) and swapped out a discolored wheel bearing. The result is such a noticeable difference over the slightly loose wheel bearing I had after the 393 trail shook my front end apart in December.
 

Users who are viewing this thread

Back
Top Bottom