Winch solenoids mounted in engine bay? (1 Viewer)

[lcgeek]

For those that have done it, where did you put them and would greatly appreciate a pic or two. Real estate seems limited in there

 

[retrofive]

I removed the silly PAIR thingy coming out the air filter and located in that general area.

 

[greentruck]

If you're adding a battery box, this is one place it'll fit with fairly short cabling dropping down and out to the winch. I then tucked my dual battery charge controller behind the box with a BlueSea switch on top.

 

[half k cruiser]

I mounted mine in front of the DS battery. I simply took some angle iron, welded a bracket to it, then bolted up the contactor. I then made custom cables that go down, out the DS headlight hole, under the rad, and over the bumper to the winch. Routing is pretty easy and I was able to run x4 1/0 cables this way.

 

[Alic]

That is my front solenoid.
Mounted on 3 point 2mm bracket. Screwed on original places.
Wires went into cab where socket is installed to prevent contacts from corrosion and to prevent control wire from be forgoten after winching.

 

[superjuice]

 

[LC4LIFE]

 

[lcgeek]

Thanks for all the ideas. I ended up throwing an L bracket on it and bolting to back of Aux battery box.

[URL=http://s193.photobucket.com/user/lcgeek/media/20170228_123916_zpskg0gxllu.jpg.html] [/URL]

[URL=http://s193.photobucket.com/user/lcgeek/media/20170228_130014_zpsqbyd8msj.jpg.html] [/URL]

 

[stevezero]

View attachment 1411425

That is one purty radiator

 

[lcgeek]

That is one purty radiator

I know, me got radiator envy.