Yukon LX's latest activity

Rig looks amazing and love the wheels too. Have a link to a build thread or mod list to fit the 37s?

SWVA waters

I run 37s on mine. Have for 2 years. Have wheel spacers, 2.5 OME lift, had to trim the front body mounts. They work great though. At full lock and fully compressed the outer lugs of the tires will still slightly rub the front body mounts, but not...

Thank you.

Thanks GatorBait. All pieces that were shipped were installed. I appreciate your help in rectifying the issue. What is the best email to reach you?

Highly unlikely, as there are no marks elsewhere on the rear or tire. But even if it did. If it were light enough not to notice, I would not expect it to break. I have slammed my Bump It Off-road on the ground, backed into trees off road to get...

You’ve got a 37 right? I’d email Ben or Cole and let them make it right. That part of the carrier is easily swappable.

Has anyone has failures with their Dissent bumpers? I put one on my 200 series, and already have a crack. I have a 100 also, that gets the heavy lifting on the tough stuff off road. It has a Bump It Off Road high clearance rear. I have beat...

Arb bull bar front, bump it off road high clearance rear.

Maintenance by the book, CVs every couple years, and a new rack once over the 320k life so far. I also kill my brakes by packing them with mud. That is pricey, but that is on me. Miles are not a problem. Maintain it well, and it will go till...

With proper maintenance they will run until you total it. ;)

LT-5 motor all day!! You know you want 755hp.

I am already running 37s. With the OME lift, there is just a bit too much rake. Do you know of a 200 body lift?

I talked with Wescott, and it will not work. Their pieces are only milled for factory struts

Can you add a Westcott Collar lift to a 2 inch OME lift for more overall lift. I originally put. Leveling kit on top of the struts, and this blew the CVs. Is there any way to combine the Westcott Designs with Old Man Emu Heavy?

Took a little trimming on the body mounts, removed a little plastic, added wheel spacers, and fits the 37s with just a little rubbing at full compression and lock.

Last one

…

More mud

Mud

Thinking of this blue marlin we had on the wire last spring, waiting for the water to warm up!

Caked