wagonteeth's latest activity

  • wagonteeth
    Just bought a ds seat cushion from Japan. It got to me quicker than a part I order from Florida.
  • wagonteeth
    Yep, look inside the wheel hub hole. There is likely a lip that raises a few mm and its there to retain the center cap for the wheel. This has to be machined iut to work on an 80. Chek your front too. The lip would just be touching your drive...
  • wagonteeth
    wagonteeth replied to the thread hdj81 windows.
    Go to ppartsouq.com and enter your Vin Itll give you all of the part numbers and you can cross reference on us sites as needed. I often just get the p/n and paste then add "toyota" to see what Google comes up with. Window rubbers are the same...
  • wagonteeth
    wagonteeth replied to the thread Monthly Meeting Information.
    Gonna do my best to attend. Meeting at the trailhead? And is this a rain or shine event?
  • wagonteeth
    wagonteeth replied to the thread Monthly Meeting Information.
    It says it's for 100, 200 and 300 series. Are 80s welcome?
  • wagonteeth
    wagonteeth replied to the thread Monthly Meeting Information.
    I just missed the March meeting, but would like to show up for the mid March ride in north Ga. Is this still on?
  • wagonteeth
    wagonteeth replied to the thread OME 2860 Dimensions.
    If they were open box, there's a fair chance someone got heavies, found them too stiff and order 860s and returned the 864s in the box. If Noone beats me, I'll measure my 860 diameter and post. They're on the truck so can't give you oal
  • wagonteeth
    Yeah 1.5" is what mine were.
  • wagonteeth
    wagonteeth reacted to azTony's post in the thread How to replace your seat bottom foam with Like Like.
    This is the first time I have done this so there may be a better way, the following is just the way I did it. The part numbers I am showing is for a 1993 with manual controls and cloth interior. 71512-60020 is the driver seat and...
  • wagonteeth
    Taking the door panel off and putting the window back in the track takes about 15 minutes. I fixed mine with some fipg to keep the rubber sleeve thingy glued to the glass. It stays in the lift well. Adding the fipg took another 10 minutes to...
Back
Top Bottom