Recent content by TheMAN

  1. T

    LSD Rear axle noise after gear oil change

    you probably need to add an LSD friction modifier additive "ideal for limited slip" doesn't mean anything if it doesn't say specifically what type of LSD it's for you probably have a clutch type LSD and not torsen, so you DO need an additive if all else fails, buy the toyota LSD oil
  2. T

    Lexus 4.0 swap/solid axle swap-92 4-Runner pics and write up

    looks huge like the supra pump
  3. T

    Lexus 4.0 swap/solid axle swap-92 4-Runner pics and write up

    those pics you posted are a little small... it's hard to see the details... :frown: do you think you can post ones twice as big? :)
  4. T

    Neutral Safety Switch Know-How

    it's an auto, you can't eliminate the switch! the switch is NOT a "neutral switch", it's the range sensor, or "inhibitor switch" as toyota likes to call it the same switch allows the ECU to know what position your shifter is in... D, 2, L, etc
  5. T

    Newbie To The Pickup Scene

    if the motor runs more lean, the NOx emissions will go up... NOx and HC emissions go hand in hand with the air fuel ratios :)
  6. T

    Newbie To The Pickup Scene

    that truck looks too nice to beat on
  7. T

    The wrong way to change a pinion seal...

    transmission assembly lube or silicone grease is more suitable for lubing up the seal than bearing seal... they will mix easier with the gear oil and not cause problems I have seen some OEM oil seals from various Japanese auto makers to pregrease them with silicone grease... the Toyota oil...
  8. T

    I would buy this if they would (or could) sell it

    I like that recaro fabric, but not the leather sides or the poo brown interior... I wish they used a dark brown or charcoal black fabric for the seat sides/head rest... it'll have a nicer contrast with even a poo brown interior
  9. T

    '88 1uz 4runner Build

    That's a very nice jeep... I see it's LHD, is this a US Army surplus special? ;)
  10. T

    '88 1uz 4runner Build

    it's powered by a dude with a funny accent! :lol:
  11. T

    '88 1uz 4runner Build

    make sure that starter is good! you don't want a dodgy starter installed in one of these engines (one of the hardest to replace)! is that a land rover parked over to the right? oh yeah, make sure those ebay gaskets work! I saw a thread on another forum the other day where someone said some of...
  12. T

    1979 Transfer case lever relocation?

    chicken drumstick in a bowl of pudding? I never tried that before! :lol:
  13. T

    1979 Transfer case lever relocation?

    I suppose a short throw shifter upgrade is in order? ;) no, "short throw" doesn't mean shorten the stick, it means you reduce the amount of travel when you shift!
  14. T

    changed O2 sensor, now won't crank. HELP!

    what does the code say? in my experience, splice in O2 sensors are nothing but trouble... it's worth the money for an exact fit replacement.... such as one from Toyota, aftermarket Denso, or NTK
  15. T

    1979 Transfer case lever relocation?

    that thing is a beauty! reminds me of the 83 2WD my grandfather had
Back
Top Bottom