Here's the guy's setup. All hydraulic. It'd be pretty slow going if you had one of the cheaper fully manual Wood-Misers. This guy just started doing this last year and from FB, CL and word of mouth he's booked through August working weekends...
Good luck finding another knuckle!!! Personally I would be OK with a helicoil repair done correctly. I might even have a HC kit here in that size I believe it's 12MM not sure what the pitch is offhand. Let me know what you plan to do in the...
Think about using a hydro boost setup from a late model Chevy/GM pickup. There's room for it and as long as you have power steering already it gives plenty of boost!!!!!
Here's a complete rear window lift/lower mechanism. Yes the arms are in correct time and the wire leads are uncut and unbutchered, motor and gearbox all there. Plug and play as far as I can see. $125 buyer pays shipping. I'm cleaning out the...
I suspect this is from a three speed case but am unsure because it is heavily ribbed. The gear on the output shaft is ten spline. No cracks turns freely $140 buyer pays shipping best to email me shmukter@pa.metrocast.net...
I remember it like it was yesterday!!!!! I remember Brutus (Steve Colavito) wanted yo just yank it onto its' wheels by hand but we used a strap and somebody's winch.
The clustertruck has been relegated to the driveway so ye olde daily can get some much needed and long delayed love for its 150,000mi birthday. For those unfamiliar, since it’s not a Toyota, 150,000 mi is a lot.
Basically, the AC pooched in...
I took last week off for my in laws coming in to town. My father in law is in construction and we cleaned out and repaired the right side of my barn that got smacked by a falling tree some time before we bought the place 8 years ago. It's crazy...
Also in my saga of home ownership I has a leak in my basement, thanks again to the previous owners half@$$ work, the half bath he roughed in had a valve start to leak water under a wall that had no other plumbing in it...
Lastly today, my...
Great to see stuff being given away! Every year at the coal mine event I take as many coffee cans full of land cruiser and metric hardware and small parts and give them away the guys love it!!!!!
Dug this baby out from the back of a shelf not sure where it came from but I think it's probably from a mid-late seventies 2F. You can see the casting numbers in the photos. I know good cylinder heads are awfully hard to come by these days, I'm...
Getting several things done that thankfully I'm not doing myself.
LX450 is getting the exhaust squared away after the rear CAT finally quit. I just had a backup cam, new speakers and a 10" sub installed since the old system was showing it's age...
It is worth it for Friday and Saturday.
We have peeps that drive their 40s regularly on these long trips. @StaleAle rolls in his to and from and @BROKEROB1 drives from PA in his 40.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.