Recent content by SDFJ60JFK

I know old thread but.... Hypothetically, if I had a complete but rolled donor truck why is this a bad idea. The weight difference is not that much between the Prado and an 80 series. The 1kzte can be turned up a little. Has anyone actually done this? Tell me why it will not work? Thanks...

Truck has been sold. Thanks mud!!!

Hello all, I have a 92 FJ80 that has taken its last journey. It is Champagne color. 327500 miles. Bad Transmission. . Im looking for FJ60 Front end parts and cash, of course. I have taken the intake piping AFM and distributor and igniter. The front end is beat up some. Text message or...

Make a reasonable offer they might become yours..... John

I have 2 FJ 60 ignitors for sale Both were working fine when removed from running trucks. I have a 3fe in my 60 now so I don't need them. Coils and mounting bracket included $125 each shipped priority mail. The dizzys are also FJ 60. One has a broken advance plate and is missing the drive...

Ok so I went and looked in my Cruiser notebook and I found this Info: "For those with >78 full electronic ignition with the mag pickup coil, the cheapie spare/replacement NAPA ignitor is a TP50, fits dodge/plymouth/chrysler 72-92. Its like 20-30 buck, and you can get the connector that fits it...

I don't know how to do it, but there is a way to use a Chrysler igniter box similar to this one. "NAPA TP-50" I think that I had saved this info a long time ago from the LCML. Though it is probably gone now Look up the schematics for both and it should be obvious how to make it work. This...

If this is for an FJ 60, I have one. PM me John

Funny, I have a couple of these that I have kept because I know they are expensive to buy. I needed one many years ago in a quicky type situation, I paid 160 shipped for that one. Trannys are $125 because they hardly ever go bad What rubber seal? I thought these were pretty much OK unless the...

never tried to mount an internal pump in the 62 tank, the 62 tank is set up for the sender in one hole and pump in the other.

I am pretty sure that you can install without the bracket and it will work fine, years ago I did mine that way and it works just fine, John

So funny. My youngest and I just had the same conversation about his 71 Dart and it being hard to start when cold. Choke was only closing about 80% of the way. I also found on my FJ 60 that if the choke closes 100% I need only 1 pump on the pedal and only when it is below 30F. At zero she...

These parts from any 3FE 80 or 62 will work.... Thanks John

Looking for a spare cold start injector and the line steel line that goes to it from the fuel rail. The line has banjo fittings on both ends. I also need the electrical connector for the cold start injector with about 3 inches of wire on it. cold start injector steel line electrical...

Rodney flush will probably fix it. https://forum.ih8mud.com/showpost.php?p=1155843&postcount=10 I do this to all of my autos every 25 K miles. THe Local tranny guru seems to think it is over kill. But thats how Land Cruisers work. John