scottryana
Latest activity Postings Media Albums Post Areas About Post areas Events
-
-
scottryana reacted to Cruisers and Co's post in the thread Cruisers and Company 80 Series Turbo with
Like.
Wish I had done it years ago -
scottryana replied to the thread Cruisers and Company 80 Series Turbo.Turbo is a good thing!
-
scottryana reacted to Cruisers and Co's post in the thread Cruisers and Company 80 Series Turbo with Like.
Drove from Denver to Moab yesterday. I was following our trailer that's loaded for Cruise Moab so we were only doing 65ish over the big passes but I backed off on one of the strait aways to put some distance between myself and the trailer as we...
-
scottryana replied to the thread Wife's 1,900 mile LX600 just shuddered to a stop on I-10, this should be fun..There are spots in Texas where the speed limit is 85mph, so 10 over is 95mph. There is a toll road stretch between San Antonio and Austin that I would routinely clock 100mph+ easily.
-
scottryana reacted to SNLC's post in the thread Builds 1997 FZJ80 to HDJ80 1HD-FTE + H152F with Like.
Cheers
-
scottryana reacted to Fj80oregon's post in the thread What Did You Do with Your 80 This Weekend? with Like.
Started back on the turbo!
-
scottryana reacted to Cruisers and Co's post in the thread Cruisers and Company 80 Series Turbo with Like.
Another one has been up and running for about a week now. @ttFJC brought his 80 down from MT. C&C Turbo, new injectors, new knock sensors, new O2's, full exhaust, new kickdown cable (yes we have those for the 343) since it was broken, a transfer...
-
scottryana reacted to SNLC's post in the thread Builds 1997 FZJ80 to HDJ80 1HD-FTE + H152F with Like.
The body has gone out for paint. Cheers
-
scottryana replied to the thread Is the 100 series really more reliable than the 80?.GX460 doesn't have a 2UZ. It has a 1UR-FE
-
scottryana replied to the thread White smoke fuel smell after Bosch injector upgrade. Help?.Can you provide the listing/details for the injectors you used? Stock should be around 305cc, if you some how used larger injectors the computer is not going to be able to compensate. Do you have any codes?
-
Took a few pics when I was messing around at the shop. This is how much in a visual sense we extended the wheelbase. Cheers
-
scottryana replied to the thread Question about Bolt/Nut/Washer sizes and Part Numbers.You can look on Toyota's site, Partsouq or Amayama for part numbers and ordering all work about the same. Some seem to like Partsouq for a little easier part number lookups.
-
scottryana replied to the thread Comparing steel to 7075 - drag link edition.Had wheels and tires on, no one under it, worst case scenario it falls off the jack and back on to the tires. No big deal. lol
-
scottryana replied to the thread Comparing steel to 7075 - drag link edition.Strong work!
-
scottryana reacted to Delta VS's post in the thread Comparing steel to 7075 - drag link edition with Like.
Getting ready to pull engine from one of the shop 80s so figured this comparison would be best done before that. This video compares relatively new (2-3000ish miles) OEM drag link to our 7075 drag link. The difference is noticeable. Decided to...
-
Assembled in Japan recently by Toyota! 🤩 Cheers
-
scottryana reacted to SNLC's post in the thread Builds 1997 FZJ80 to HDJ80 1HD-FTE + H152F with Like.
More! 🤣🥸 Cheers
-
scottryana reacted to SNLC's post in the thread Builds 1997 FZJ80 to HDJ80 1HD-FTE + H152F with Like.
Some pictures to do this bad mamba jamba justice! 🙌 Cheers
-
scottryana reacted to SNLC's post in the thread Builds 1997 FZJ80 to HDJ80 1HD-FTE + H152F with Like.
A little something extra on the valve cover. Will get it clear coated now. Cheers
-
scottryana reacted to SNLC's post in the thread Builds 1997 FZJ80 to HDJ80 1HD-FTE + H152F with Like.
Pretty well finished build out this morning. Cheers
-
scottryana replied to the thread Help identifying large piece of gasket found in radiator..That is the o-ring from around your thermostat.
-
scottryana reacted to SNLC's post in the thread Builds 1997 FZJ80 to HDJ80 1HD-FTE + H152F with Like.
and installed. Cheers
-
scottryana reacted to SNLC's post in the thread Builds 1997 FZJ80 to HDJ80 1HD-FTE + H152F with Like.
Turbo and exhaust manifold reassembled and ready to install. Cheers
-
scottryana replied to the thread LX450 deflare question - threaded inserts.You don't need to drill them out, you can grab them with pliers and pull them out
-
scottryana reacted to SNLC's post in the thread Builds 1997 FZJ80 to HDJ80 1HD-FTE + H152F with Like.
The engine got a good hand cleaning and looks new again. Cheers
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…