Recent content by SC T100

The shop may have them way high if you have E-Rated tires. They probably have 50 psi in them. Might have even put the max 80.

Skid Row is the only skid plate maker that isn't custom. Try Rocky Road for bolt-on sliders.

I remember seeing somewhere the DTs were designed for high-torque/heavy diesel trucks. Wish I could remember where now.

You'll have to find a NOS AT3...which I believe have been discontinued. The new ones are AT3 4Ss, one of the new versions.

Glad to hear the timing belt was done...you have to remove it do the water pump so it was probably replaced along with the timing belt. If not, run it and address it if you have any issues or leaks down the road. I did my serpentine belt and idlers/tensioner when I had the timing belt done a...

Welcome! I'm in the Charleston area myself! Sounds like you have a good plan! I would also plan on replacing the timing belt/water pump (an Aisin kit is the way to go...about $170 but labor is expensive), as well as the lower ball joints (OEM only...about $200 for the kit). If it's 4WD you'll...

The other day my ex-Toyota master tech FIL and I did the timing belt and water pump with the Aisin Kit, and we also did the drive belt and pulleys/tensioners with the Gates kit. Idles a lot quiter now that all the bearings are new except for the alternator and A/C compressor. Oh, and i also...

This almost makes me think it's a mis-label of a 31x10.5x15. That does seem pretty far off.

Will do, thanks!

I know it's small potatoes, but willing to sell and ship the rear mudflaps?

Those SuspensionMaxx extended links are excellent and worth every penny. After my lift went on, I was getting terrible clunking from the end links. These fixed it, and it rides and handles great. No longer feels like the front end is coming apart.

Amazon has had sets on recently. They are good quality for about 1/3 the price of OEM replacements.

I wasn't able to find one, but you may have luck with auction sites. I ended up picking up their universal kit for about $100. I haven't installed it yet, but it should work as a good alternative. (Note: It's designed for use with a drop-in bedliner)

I bought the Amazon set for about that, but mine were the non-black ones and came with bulbs. It may be the same supplier, but I'm not sure. I think mine came in boxes marked as Angel Eyes or something similar. The fit for the headlights is fine, but the corner lights sit just a tad proud of the...

I just sold one earlier this year. A 4x4 with low miles and no rust at $5K is undervalue I would say from my experience. You got a good deal if it's been maintained and the interior and body are in good shape too.