Recent content by rydz

Hi Guys, looking back through this forum I found my listing of selling my rolled LN131 from 2011! In any case I never sold the truck and it sat out in the back of my shop for 9 years, for giggles I decided to drag it out and see if I could fire it up, son of a gun, a few pumps of the fuel...

Just to be clear,the vehcle drive absolutely perfect,will start with a 1/4 turn of the key even in minus 15.C,it tracks nice and straight,and nothing rubs,even all the lights still work. As in my initial post,after is rolled ,I drove it home approx 200 Kms to drop of my wife,the drove it again...

Hi Guys There is no date of manufacture stamped anywhere on JDM vehicles,it is based on the Chassis number only. As such when CANADA CUSTOMS did the paperwork when the car arrived here in CANADA it got registered as a 1980,as mentioned I did not care as it was not going to be sold but for my...

I dont think I can just drag the vehicle across the border and then sell it to you. All you have to as a resident (and the importer) would be to file the proper paperwork on the US side once you bring it in. Its not that difficult and if you want to import it as a complete vehicle or for...

Hi Spike All the holes in the flanges are the 10mm size,the studs in the transfer case flange are also 10mm,the 11 mm bolts just float on,I have no idea why they would have put 10mm bolts,I did check the japan IPC and they have the 11 mm bolts ect as well,so I am not doubting anyone. But I...

Hi there Both the TC flange and the DS flange are 10MM,the truck is bone stock and was not modified The drive shaft flange holes are also 10mm,so I have to assume it was built that way. I ordered the hardware brand new at Toyota,so I will go back and order the same Thing just for the mini...

Ok I will check out the hardware for the 84+ mini trucks ,I think I read somewhere they were 10mm. thanks again Guys Paulo

sorry bud, those are the partnumber for the 11mm hardware. I know those dont work,I have a set Thanks Paulo

Hi Guys i did a search but no joy,I have a 1988 HJ61 and getting the front drive repaired I have "lost" the drive shaft hardware. I did a search here and was able to find that they are supposed to be 11mm bolts ect,got the toyota partnumber and ordered them,NOT in my case! The bolts...

Hi Yep its in Quebec,yes its a 5 speed,I posted in the wrong area but there are pictures of it in the diesel section. All new fluids and front brakes,very recent clutch (2000Kms previous to the roll) Let me know Paulo

Hi Jan I would think the buyer would probably use for parts,but at least you have the entire truck to use vs only a motor and gearbox then have to figure out everything else. I know I could not find a guy who I felt could repair the truck properly. But the unit is titled as a 1980 and...

Hi Guys I didnt see this section for the sale of stuff so I posted in the Diesel section instead. If I have to move the whole thing please mods let me know,if not the listing is in the diesel tech section. Great truck,very slow roll roof got bent but I drove it home 150 Kms or so and it runs...

Hi Chuck I have (had) a 3L in a JDM Surf and loved it,not the fastest truck but great for torque and in the city it was awsome,put 60L of fuel in it and get 600Kms out of it everytime,sometimes more! I am selling my surf since I slow rolled it and dont think I can find anyone to repair it...

Hi Guys awhile back I went out with my wife for here first 4WD outing and while we pulled over to let a fellow offroader by,well the edge was closer than I thought and the Surf sort of fell over and down the hill,we pulled it out and drove it home 150kms or so,I was not sure if I was going...

Hi Guys Nope the axles were not cut and turned,they had simply placed a wicked shim under it. That was why the SUA was quite simple to do. I think the reason the steering wheel is a little cocked was I was just ever so slightly off when I reinstalled the new pitman arm. So I may simply pop...