plink01's latest activity

  • plink01
    plink01 replied to the thread Adding winch?.
    Awesome brochure Matt. I have an 82 bj42 and a 61 series. That brochure would look awesome on my shed wall if the resolution was higher.
  • plink01
    plink01 replied to the thread Adding winch?.
    Why on earth would you put a winch on with no intention of ever using it?? To make your car look cooler?? Possibly the stupidest thing I've read here in a while.
  • plink01
    plink01 reacted to mattressking's post in the thread Adding winch? with Like Like.
    Uhhh, weigh the winch, then put similar weight on front of truck, then you'll see the difference.... Winch won't add or subtract value, only winch of 'value' is 8274 but it doesn't drive sales. If it is original and never sees dirt, I guess I...
  • plink01
    plink01 replied to the thread Some info saved.
    Incredible thread mate. Thanks for putting it all together! Your doing an awesome job.
  • plink01
    plink01 reacted to stevebradford's post in the thread Some info saved with Like Like.
    Fan shroud split, highly recommend if you like making your life easier.
  • plink01
    plink01 reacted to stevebradford's post in the thread Some info saved with Like Like.
    Occurred to me my 40 series needed a custom rear bumper
  • plink01
    plink01 reacted to stevebradford's post in the thread Some info saved with Like Like.
    Cruiser udders! I always thought the Toyota spring plates were silly. Here is my solution for cleaning up those rock snaggers. before/after Cleans it up nicely. Here they are on a 60 series with the shock attachment. Kept them low enough...
  • plink01
    plink01 reacted to stevebradford's post in the thread Some info saved with Like Like.
    Landcruiser frame plugs.
  • plink01
    plink01 reacted to stevebradford's post in the thread Some info saved with Like Like.
    Welded in new all new stainless on three sides of the windshield frame. The new windshield and gasket still fit perfectly after all that work.
  • plink01
    Yup the icemaker works! The aircon had no gas left. I put in a brand new condenser, evaporator, drier and low pressure switch. I replaced all the o rings that were easy to get to. The evaporator was covered in heaps of leaves and dust. As a...
    • 20240210_162847.jpg
  • plink01
    Ok I think your in luck, Megazip shows them having one! They are 10% off to till tomorrow so I'd buy it fast. I'd be blown away if there was any more than a handful available oem world wide. If you don't look at a parts diagram you wouldn't...
  • plink01
    I'm going out for a ride on my dirtbike. I'll have a proper look when I get home. I had a super quick look and there was one for sale on American Ebay. https://www.ebay.com/itm/364692201145
  • plink01
    plink01 reacted to Mark W's post in the thread Headlight juice with Like Like.
    No. The brightness of your headlights will be impacted by the voltage getting to them. Unless your charging system is failing that is not something that changes. Of course, your charging system may be failing. What sort of headlights do you...
  • plink01
    will be wrenching into the late night to make manifest The 💯 % all toyota OEM parts de-smog kit is a confirmed ✅ sucsess Now to plow through the vaccuim routing the correct way
  • plink01
    plink01 reacted to cbmontgo's post in the thread Builds Project Pikachu: 1977 FJ40 with Like Like.
    Three coats of paint are down. Turned out as well as I had hoped. The liner is all gone and I can actually see the floors and access bolts without everything being caked. #ih8bedliner.
  • plink01
    Postage was pretty quick for me. Maybe 2 weeks I think. I was pretty impressed because lots of info I found about it in past threads said the part was discontinued. There is nothing better than being able to bolt in an oem part in that fits...
  • plink01
    Thanks for posting this, my truck needs this fix. I just ordered the part from Amayama (first time order). It will be interested to see how long shipment takes!
  • plink01
    Just thought I'd add this for anyone searching in the future. The location of the Blower Resistor on a HJ61 right hand drive is directly behind this metal support. Just follow the wires, they plug straight into it. It's only 2 screws and you...
    • 20240131_135821.jpg
    • 20240131_140210.jpg
  • plink01
    Brake booster benefit is going from the single to dual diaphragm. 60 series had single diaphragm, 44610-60530 80’s had dual diaphragm. 44610-60620 City Racer makes a nice dual diaphragm replacement unit for 60 series. Most people keep the...
  • plink01
    plink01 reacted to Racer65's post in the thread Unobtainium with Like Like.
    Reproduction rear heater motor with fan. Fits well and works great. Expected to be released in March. This version is based on the one in my truck ('79-'80), so it's single speed as with all such motors from '74+. For other years the plug is...
  • plink01
    plink01 reacted to littleafrica's post in the thread Unobtainium with Like Like.
    Almost like winning the lottery Toyota 61310-90310 Toyota 61601-90479 1981 till 1984 NOS OEM Sidepanels Cant believe how lucky I am.
  • plink01
    Without going through 32 pages, have they assembled a master list of item that are being reproduced. and is this list updated as more items are added? very useful and cool for all of us.
  • plink01
    Now that I’m 40, it’s time to slow down. And the best way to do that is to drop my transmission and transfer case for a Valley Hybrids Orion! Before I can step back on the Rubicon, my gearing needs to drop. So here is step one, removing the old...
  • plink01
    Interesting thread, my rear subwoofer is the same. I have the amp and there is power to it, but the sub has been removed for some reason. I'm guessing it was torn and making annoying noises. My rear speakers still work, they don't run off the...
    • 20221031_095052.jpg
    • 20221031_154501.jpg
  • plink01
    Mine is a bit rough. It's night time here so not ideal time to photo it. It's an Australian spec HJ61. The plate is original.
    • 20240107_215822.jpg
Back
Top Bottom