Axles front,rear complete, springs on top,w/ 4.11 gears. 1 complete stock rear, 2 front,1 rear housing. 4 speed trans (87) Advance adapters 700r4 to fj60 case,w/ transmission and good transfercase. Also 87 fj60 flywheel and clutch v. g. c. All parts pick up only! Make a reasonable offer. Bring...
I have F&R axles complete, 4.11 gears, spring over- not cut and turned, $500
stock springs, very nice shape, rear are almost new, $200
FJ60 transfer mated to GM 700r4 trans via advance adpter, $700
axle housings, 1-fj62 front, 1 fj60 front, 2 rears, 1 complete...
I have a Volvo fan in my fj62, which replaced a Black Magic - that doesn't cover enough rad. area. The Volvo fan moves more air than the Black Magic and fits the rad. great, very little trimming to fit. Got mine off Ebay for $18. Used an adjustable thermostat switch. Works great and frees up...
I'm running a Volvo fan in my 89 fj62. Fits the rad. perfect and pulls more than the Black Majic I was running. Was a bunch on Ebay awhile back got mine for $18.00 + shipping.
High Steer arms
Looking for arms or complete set up for fj60. Prefer something like Marlin crawler arms but open to anything but cast arms (too dangerous for dd).
Not sure about the Taurus fan but I used a Volvo fan on my fj62 (ebay item #7989851214 ). This fits almost perfect over rad. and is thin, also pulls more cfm than a Black magic fan. Just a little trimming for the bottom hose and drain. This has been one of the most noticable power improvements...
Fj60 chrome wheel
Still looking for a good clean stock chrome wheel for a fj60. Need 1 or 2. Rust free or very light rust would be great. Will pay a reasonable price + shipping.
Fj60 -62 wheel
Looking for a nice rust free stock chrome fj60-62 wheel. I have three clean and one rusty one, that I'd like to replace. Will pay reasonable price + shipping. Thank's
There is no divider on 60, 62 or the 95 4runner master cylinders that I have. Would be careful removing this valve,before you know exactly what it's for, could be a Big mistake.
Not positive. But I think the purpose of the valve is for safety. If there is a sudden loss of pressure, front or rear, you will still have some braking. If this is the case I wouldn't remove the valve.
I'm running 89 fj62 with a H55F and 4.56's and 35x12.5x15 General m/t's. Lower 1'st gear works great on the trails and cruise at 70mph @ 3100 rpm. I think this is a perfect combination for DD and occasional offroading. :)
Fj62 - 60 chrome wheel
Looking for one clean rustfree stock chrome fj62 fj60 wheel. I have 3 clean ones and one rusted one that I would like to replace. Will pay reasonable price + shipping. Thank's