Recent content by NZHJ61CRUISER

Has anyone had any experience or has installed a mambatek 12ht upgrade turbo? They have 2 versions a 16g and 18g comp wheel. turbo is a tdo5h based turbo which I understand is a very good unit? What would be the difference in performance between the 16g and 18g? Sorry for hijack but thought the...

Gengis, when they balance the turbo they only use the turbine/shaft and comp wheel part of the turbo, when it comes back from being balanced you mark the position of comp wheel and nut to the shaft and separate and put the turbo back together aligning the comp wheel to the shaft again. The heat...

Rebuilt my ct26 turbo when I recoed the 12ht. Made a hybrid turbo with supra wheel and housing. Was going great and have been running at 15psi, early on it did go over 20psi when I didn't have a actuator on it. Now it seems like the oil seals are leaking and I have oil in the intake . I guess I...

Hi all, just wondering if all the turbo geniuses out there can help me out. I'm marinising a 1kzte engine and want to put a new turbo on it that will give me around 180+ hp. maybe running around 18 psi boost. I'll be fabricating a complete new water jacket exhaust manifold so can make any brand...

Hi all, Have repowered my hj60 with a 12ht. Have been back on the road for a month now. Everything is going good. A big thanks to all the help and info I have got off this forum. Everyone's advise very much appreciated. So now the hj60 has a rebuilt 12ht with a hybrid supra turbo setup...

Photos don't show up for me either. any possibility of a re post? cheers

Sounds like the Batteries might be stuffed if they are not holding charge unless you have a draw on the system when car is off. From my limited knowledge of these things you shouldn't take any 12V accessories off one batt only. stuffs up the charging system and will more than half the life of...

Took Tank out today and swapped the pickup over. Glad that is over haha. screws came out ok. The fuel return pipe does go to the bottom of the tank right next to the fuel pickup line. So might be something in that rather than just routing in into the breather pipe. Although on a diesel engine...

fuel return cheers, Have already installed the metal return line and dropped the old tank out of the hj61 looked at the screw holding the main fuel line and return line pipes and didn't think I would be able to get it off so was wondering if I could get away without having to drop the other...

There are a few groups of lines coming out of the fuel tank. Anyone know what they are for? there is a group of 4 lines that go up into some plastic thing in the back side panel. another group of 3 lines further back. one of them is the breather. Wanting to know if I can 'T' into any of these...

12ht fuel return line With the fuel return line can I just 'T' it into one of the breather or evaporator lines going in to the fuel tank or do I need to replace the pickup ? Anyone know what all the hoses are for going into the fuel tank? there are about 7 of them. 4 in one group and 3 further...

supra turbo elbow You won't have to plug holes with the supra elbow, they are already plugged. looks like you need to drill them out if you want to use them.

HI, Anyone swapped a 12ht into a 2H hj60 cruiser can help me out. Got the 12ht into the hj60 today and started bolting everything back on. Ran into a couple problems. What do I do with the diesel return line. 12 ht runs it right back into the fuel tank. the hj60/2h runs it back into a valve in...

Hi all, once again need some advice please :) 12ht is all rebuilt and hopefully will go into the truck tonight. supra hybrid turbo has been finished and bolted on. Now on to planning the exhaust. I'm installing a 3" stainless exhaust. Can I keep the existing dump pipe or do I need to make up a...

Cheers dougal, will stay with the stock turbine.