Recent content by NHouston

  1. NHouston

    Builds The Mall Crusher

    Rhino Backbone and Pioneer Platform (84x49) install completed. Really happy with this setup.
  2. NHouston

    Builds The Mall Crusher

    260k and time to change F/R Diff and T-Case Fluid
  3. NHouston

    Builds The Mall Crusher

    Drain and refill on the transmission today. 2.8 quarts drained out of the pan. Replaced with 2.8 quarts of Toyota WS and new gasket for drain plug and new o-ring for fill plug. I am at 260k. I did a full transmission fluid exchange (12 quarts Toyota WS) when I purchased my 200 at 172k. A drain...
  4. NHouston

    Builds The Mall Crusher

    Just hit 260k. Time for 5k oil and filter change!
  5. NHouston

    Builds The Mall Crusher

    Scored a great deal on a Rhino Pioneer Platform (84x49) and Rhino Backbone Rails. Been leaning towards this exact setup since I saw it @TN LX570 Appreciate @mceagle555 walking me through the process for the 200 series. I was a bit nervous hearing a few horror stories on these installs. It...
  6. NHouston

    Builds The Mall Crusher

    Just hit 260k and time to catch up on a few maintenance items and updates I wanted to do on our 2010. 1. Denso Iridium Spark Plugs (bought from Rock Auto) 2. Denso Coil Packs (bought from Rock Auto) 3. OEM Valve Covers Gaskets and Tube Seals (was done around 120k, but developed a slight weep...
  7. NHouston

    Builds The Mall Crusher

    Oil/filter change, air filter change, and new PCV/hose. Converted over to 5W-30 as well and changed the oil cap. I can already tell at start up a big difference in how this oil quiets the 5.7 down.
  8. NHouston

    What have you done to your 200 Series this week?

    New shoes and a engine clean!
  9. NHouston

    Builds The Mall Crusher

    New shoes on the Mall Crusher. BF KO2’s in 275/70/18. Previously running 275/65/18. Really like the look and stance this 33” tire gives running factory suspension and OEM front spacers.
  10. NHouston

    Builds The Mall Crusher

    No issues at all
  11. NHouston

    Parting Out Franklin, TN - 1998 100 Series - gray/tan

    Need the rear driver side interior grab handle with plastic hanger tab (mine broke off hanging dry cleaning). I am local in 37179.
  12. NHouston

    Builds The Texas Land Crusher Build Thread

    It’s been awhile since last post. Our family recently relocated back home to Tennessee. Haven’t had much time to work on the cruiser with the relocation. Weather was beautiful this weekend so I was able to get my 5k service done. Had the slightest seepage of grease coming past the small OEM...
  13. NHouston

    Builds The Mall Crusher

    225k Miles and going strong! 5k oil change today (M1 Synthetic/TRD Filter) Toyota Air Filter 50k coolant change (Toyota Super Long Life)
  14. NHouston

    For Sale TN 1996 3X Locked FZJ80

    Still available. I am in Thompson’s Station.
Back
Top Bottom