I thought I’d used up my allocation of square one’s. Guess not.
Doesn‘t look like @tahoe40/45 ’s rib is trimmed, but looks like mine needs to be to clear the tailgate latch. Sup?
Carrier and lock location seem to be spot on to where the...
I was wondering if there is infrastructure in place to distribute the parts in the US. Big elephant for sure.
Hopefully ”they” make and distribute at least as many parts as there are threads about it on Mud 😂.
Mike @mmcinnis I’ve had good luck with John @pardion for these things. Maybe he’ll have one. The 40’s carriers are the same, just needs some trimming as pointed out above. I cut those tailgate catches that are on my rig - nonstock PO versions...
Unbelievable, a razor blade 😂. I’m good at finding all the discarded bolts, or rather my tires are good at it.
By chance, are there any pics or info on the pads used in your newly covered seats? Specifically the bottoms, as I’m assuming you...
Finally got steering knuckle upgrade done, and newly covered seats back. Rear bench seats were done wrong so they are still at upholstery shop.
I also replaced the steering shaft dust boot and put on new pedal pads.
And it just struck my puny brain that your rig @unimog is the infamous brown turd referred to by Nolan @wngrog. Wasn't this a possible arcade center for @jmlockwood 's game room at one point in alien time?
@Unimogguy that does help. Looks like 14-7/8“ to 15” is close enough! Thanks. @Redgrrr is sending me a set of the catches to copy, and (hopefully!) a set of hinges to boot (purchased). Gettin’ there! BTW, have I missed your build somewhere?
I hope this helps. Tailgate top aligns with the bed top rail. My tailgate hangs down slightly because it only has 1 chain and the chain is bent.
@middlecalf I’d be willing to loan you my tailgate latches so you could have copies made. PM me.
Don't install the glass wiper seals (the horizontal pieces that wipe the glass) until after the frame and glass are inside the door.
Leave the bumper (#56) off until AFTER the glass wiper seals have been snapped into place. With the bumper...
That is the passenger side (bed is upside down).
So your @wngrog tailgate latch bracket looks completely different than mine. Mine’s a lot longer, so that’s the issue.
Wonder what’s up with these longer and thicker brackets? Both sides are...
Need help. @whitey45 @ClemsonCruiser @DomSmith @tahoe40/45 @wngrog
Here‘s the spare tire mount partially bolted in place. The upper mount holes are there and the heavy support bracket on the inside is there. The bed where the lower holes (and...