Recent content by lx450landcruiser

  1. lx450landcruiser

    FOUND IT!: spray can plastic paint to match Tan Oak Interior

    This is from the rear side panel plastic
  2. lx450landcruiser

    FOUND IT!: spray can plastic paint to match Tan Oak Interior

    For those looking for an actual interior color match this statement is false. This color is not a match of the interior “oak” or brown
  3. lx450landcruiser

    2.5” lift caster plates plus spacer?

    Unless I installed mine wrong I believe your drilling about halfway through an existing hole so I’m not sure how you would go back?
  4. lx450landcruiser

    2.5” lift caster plates plus spacer?

    Thought I would report back. I did the install per the drilling directions. What a pain but the results are shockingly positive. Truck drives completely different and so much better. This is a 2.5” heavy lift with the 4” lift caster correction plates. I still don’t see why a machines version of...
  5. lx450landcruiser

    2.5” lift caster plates plus spacer?

    Ok I have the wits end plates which requires drilling. I have not yet started the install but it occurred to me. Is there a reason I am missing for the drilling? Why not just make the plates with the correct sized hoes in the correct locations and just trim off the lower section of the axle...
  6. lx450landcruiser

    Pop top

    Any idea on timing? I’m contemplating pulling the trigger on a diy set up but if the Aussie version is designed to my liking I would seriously consider it
  7. lx450landcruiser

    2.5” lift caster plates plus spacer?

    Thank you all! I will get them in order Cheers!
  8. lx450landcruiser

    2.5” lift caster plates plus spacer?

    Hello all I recently installed OME 2.5” heavy lift. I have not installed the caster correction bushings as I’ve been reading a lot about them not being reliable long term compared to the OEM as well as potentially not giving enough caster. My questions is many suggest going with more caster...
  9. lx450landcruiser

    Wanted 100 series steering wheel horn and pad assemble

    Would you happen to have any pics? Do you know what year 100 series wheel it was? Did you reuse an 80 series airbag. I’m wondering if it might be possible to swap an 80 series airbag in behind a 100 series cover for using the 100 series wheel
  10. lx450landcruiser

    Wanted 100 series steering wheel horn and pad assemble

    We’re you ever successful in the wheel swap?
  11. lx450landcruiser

    Infiniti Speaker Install

    Any update on these?
  12. lx450landcruiser

    LX450 Stereo wiring

    I ended up moving the pin position in the plug to the dash light dimming switch. This allows me to adjust the stereos brightness with the dimming knob to the left of the steering wheel. All good now
  13. lx450landcruiser

    LX450 Stereo wiring

    Ok it looks like I have everything working except dimming with head lights can anyone confirm the pin location on this plug above ?
  14. lx450landcruiser

    LX450 Stereo wiring

    Resurrecting this thread as there’s some confusion on my part. The attached picture is that of the Metra 70-8112. I understand it two of these are required to bypass the lx450 amp. To clarify the Metra plug should be yellow wire to constant power, red wire to ignition power, blackb to...
  15. lx450landcruiser

    SOLD Parting 7 80s, lockers, 3FE, LXs, CE. lots of parts and always changing

    Oops sorry they would be for a 97 lx450 Replacing the crap security lugs Thanks Mike
Top Bottom