LDowney's latest activity

I know of at least 4 stamp sets then :) It now has functioning brakes lights, turn signals, and running lights. I gutted the military lights and installed offroad LED pods for brakes and turn signals and mini lightbars for the running lights...

https://forum.ih8mud.com/threads/8th-annual-70-series-meet-greet-charity-ride.1316200/page-11#post-15412849 This might give you a taste of the plans in advance the full info release in May that Charles referenced

I do not recall finding any aftermarket options for the resistor, but I also do not recall looking either. With the info provided by AirheadNut, I would suggest removing the resistor first to visually inspect it. My experience was the wire...

Had to grab a couple of things out of the Cruiser so I snagged a photo while I was there. Looks like just one screw to undo instead of two. Here is a photo of the resistor, mine is a 12v variation so the part number might differ from your...

I GC'd my own house back in 1997, FWIW. I am an engineer by undergrad degree but grew up on a farm with various relatives that covered the gamut from carpentry to heavy equipment. I consider myself a decent trim carpenter and did all the trim...

Based on what I have encountered with my 70, your description indicates that the resistor is partially burned out. The last time I needed one some years ago, they were available but had to be ordered. As Coldtaco already mentioned, the...

The last of the unchanged fluids was the transfer case. The transmission has a nifty little dip stick but not for the transfer case. Way overdue.

For anybody who doesn't already know - This is the route to/from Eldorado Outpost. Riverbend Campground is off of Mullinix Rd, which is slightly offset from Old Thayer Mill Rd. We'll have some signs out; they're blue with green or white arrows.

Campground layout. Also now included in post #1. BTW, weather permitting, Saturday dinner and raffle will be held at the bottom corner of the bath house as it appears on this map. There are a fire pit and picnic tables there but bring your own...

Life is short friends. Get out there and do shǐt. Before you know it, you are fũcking dead. And everything else continues on as if you never existed.

What day is it? Past three days went like this. I think. 😂😂

They do high end restorations and have secondary business rebuilding brakes and hydraulics. I got a lifetime warranty when they rebuilt my clutch mc and booster. White Post Restorations – Fine Automobile Restorations & Brake Cylinder Solutions -...

I attended a charity clay shoot today and bought a few raffle tickets... I WON!! Unbelievable... I'm not that lucky Benelli Montifeltro - super excited to go back in 2 weeks for another charity event and try it out

I finally bought thin grips for the Beretta 92A1 Compact. Best part was that Wilson's had them on clearance for 1/3 the normal price! World of difference, even for my giant fingers. I'll have to put a few rounds through it to see if I'll need...

Seal Team ready to deploy

Added some stabilization to the down stream side of the dual 48” culvert tubes.

Once the water went down to a reasonable level, rebuilt the bridge. Added an additional 48” x 40’ culvert tube next to the existing one.

Fired up the sawmill and cut lumber and built a “land bridge” so the residents could get to work, school, shopping, etc.

Body mounts have arrived, thanks to Dave @ Japan4x4. Hopefully this is the last round of parts before the cruiser "spring cleaning" that is about to commence in my garage soon. Below is what I just measured, give or take 1mm (my metric caliper...

It was a fun event!

Inaugural year too. Few even recall the 2 years of TMC and even fewer attended. Congratulations

Seems about right.