Recent content by landlexus

  1. landlexus

    What Did You Do with Your 80 This Weekend?

    Rescue Mallinois
  2. landlexus

    What Did You Do with Your 80 This Weekend?

    Went camping and canoeing the past two weekends.
  3. landlexus

    CampTeq 80 Series popup camper

    @TWILLY, I just drilled holes in the exterior part of the clamp. I then used the mounting bolts ARB sends. I might be mistaken, but I think @LandCruiserPhil has different gutter clamps than the two of us. Edit, I just saw Phil’s clamps and they appear to be the same.
  4. landlexus

    CAMPTEQ's 80 Series Pop top Prototype

    3/4 currently. I haven’t done anything with the plywood because I’m still deciding if this is my long term solution. I would like to use something lighter in a composite form, but I haven’t figured out what to use.
  5. landlexus

    CAMPTEQ's 80 Series Pop top Prototype

    Unseasonably warm last night so I went to a nearby lake for the night. I took some more pictures of my platform bed. It’s still a work in progress as I’m working out the details.
  6. landlexus

    CAMPTEQ's 80 Series Pop top Prototype

    I agree with Phil. The benefit of the cut roof isn’t for access to the bed, but to allow more living space in inclement weather.
  7. landlexus

    CAMPTEQ's 80 Series Pop top Prototype

    Lack of overhead space mainly. Like I said it’s doable, but I don’t think you’ll be happy with it as a long term solution. If you don’t want to cut your roof just use a ladder as Phil does. If the sunroof hole was in the rear of the vehicle then it would be an awesome way to access the bed.
  8. landlexus

    CAMPTEQ's 80 Series Pop top Prototype

    I only had my top for a day before I cut the roof. Before I cut the roof I tried the sunroof access for the novelty of it, it’s doable, but not very practical in my opinion. My wife laughed at me while I crawled in there.
  9. landlexus

    CAMPTEQ's 80 Series Pop top Prototype

    I’ve got led strip lights installed. The issue is covering the hole in the headliner where the dome light/sunroof control, hence the idea of a visor shelf to cover it up.
  10. landlexus

    CAMPTEQ's 80 Series Pop top Prototype

    I’m thinking of building an overhead shelf that a light could be attached to.
  11. landlexus

    CAMPTEQ's 80 Series Pop top Prototype

    I agree about the gap between the roof and the campteq not being an issue aesthetically wise. The important part is making the headliner to the roof cut look good. The only reason I didn’t cut 3/4 was because I didn’t want to deal with the extra fabric needed to cover in the middle of the...
  12. landlexus

    CAMPTEQ's 80 Series Pop top Prototype

    My mattress is also 3” thick foam and I can fit all of my bedding. 4” mattress will be to thick to fit everything plus roof insulation.
  13. landlexus

    CAMPTEQ's 80 Series Pop top Prototype

    The bed platform is left up to you. Eric gave me a slatted bed platform and that is what Phil is currently using. Since I cut my roof I knew I wanted a platform that I could raise up out of the way and stand inside. I made a platform out of plywood into two sections. The main platform is 60in...
  14. Campteq

    Campteq

  15. landlexus

    CAMPTEQ's 80 Series Pop top Prototype

    I cut my full roof out. Just as in the picture above of @ab1985. I kept excess of the headliner, then stripped off the backing so I was only left with the fabric. I then used pinch weld molding in a tannish color to attach the fabric to the roof sheet metal. It is difficult to stretch and shape...
Top Bottom