Finally mounting up her twin ARB/ AccuAir combo. Got a ways to go but its moving again.... Overall goal is Front/ rear outside quick connects to air all 4 BF37's and 2 helper bag dedicated feeds for the rear. Took the Dobinson VT route and...
Follow up to an earlier post (sorry for not being 80-tech). 1st in class finish at the Baja 1000 with Canguro racing Saturday night. It's always an epic experience!
Untitled by Adam Tolman, on Flickr
Untitled by Adam Tolman, on Flickr...
Suspension Refresh on my LX was completed. Went with Dobinsons MRA 4" Lift 3-Way Adj. Shocks & VT Coils (2.5"). Also had Dobinsons Adj. Rear Lower Control Arms, and Adjustable F&R Panhard Bar installed along with fresh Bushings.
My...
Took the winch apart, seems there was water ingression as rust seized part that enabled the winch to be in free gear for pulling wire.
Lots of cleaning done, unfortunately seems the gasket is shot hence the water issue. Will need to get a...
Ran up to VA to run a new to me trail with some old and new friends alike. Chilly but great weekend in the woods
Turtled the 80 pretty well and discovered my winch no longer works :(
Not 80 specific but I’m down here in Baja with Canguro Racing (racing a 200 series) waiting to leave the start line tomorrow morning. We have the honor and pleasure of also supporting the JAOS racing team from Japan racing a brand new Lexus...
Unfortunately no dice there. Mr T made a hell of a package here but the trip odo wasn’t his best work. That think hasn’t worked in 10 years probably 😂
Just missed the DTE mark on the 2020 taco last week as well
Okay all, thumbs up or down.
I pick these stickers up for cheap...
I want honest opinions.
Trash or keep?
They're not applied, put magnets on to hold it up. Imagine no white background.
Thoughts.
Oh, I plan installing that rear fender also.
A week away wandering from Cape Lookout to Corolla. Not wanting to go home. Started at Portsmouth island OBX and continued exploring a couple coastal national Forests and then moved on to the marsh/swamp fringes. Ended up back on the banks...
Well I've been neglecting my land cruiser rebuild project all year, I've made little progress through the summer and fall. But I am ready to start wrapping this up and get her running again. Took off work and have the next 6 days straight to...
It took me several attempts to reply to this thread politely, so I'm just going to say, it's your vehicle...do whatever you want with it.
I just have to ask, why did you feel the need to ask the group what to do with a LC with 170k on the...
The system constantly runs and adjusts heights at all time. Putting in low does no more wear than driving to the store.
People are so strange with AHC. The brake system of the 100 uses a nearly identical hydraulic system for the brakes...
It's likely there is just a bulb burned out in the switch. If you have power to the lower portion of the switch, you should have power to the upper portion. Easy way to find out...pull the other bulb and see if it's burned out.
Since you...
Did some testing today and it lights up when pressing the brake so I assume it's the bulb. I swapped the led around and it didn't work so probably it's the wrong type. Odd because I used three different type of bulbs and none worked. Thanks...
Are you able to open any other vehicle utilities other than the AHC in Techstream? I've never had an error like that. All I can suggest is re-boot your computer and try again.
1.Attach your techstream to your vehicle
2.Input your vehicle...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.