Recent content by kmad86

  1. K

    200 Series and Tundra wheels on 100 series photo thread

    Did you ever find any others that had modified the center cap? I suppose I will need to take my tires off and machine the wheel if I need to before going the spacer route, but I wondered how far some were taking down the center cap.
  2. K

    07 LX470 VGRS ISSUE C1552 / C1554 so Steering Angle Adjust Fail.

    Ordered new VGRS controller, hopefully that fixes it but I don't feel confident in it being that. Board looked good, caps looked good. Ensured it was discharged and gave it another go with same results including a new code.
  3. K

    07 LX470 VGRS ISSUE C1552 / C1554 so Steering Angle Adjust Fail.

    I bought a 07 LX that had been wrecked on the front left. It was pretty minor damage and after the wreck I could drive it down the road at 60 MPH and it was straight, EXCEPT the steering wheel was no longer centered. I had thought this might be because when I hooked the battery up after...
  4. K

    200 Series Wheel on 100 Series front hub. V. ModificationThread?

    Any idea the smallest and best spacer to buy?
  5. K

    200 Series Wheel on 100 Series front hub. V. ModificationThread?

    So I have some bronze heritage wheels I had purchased. I had gotten confused on the modification needed to fit the front wheels because some mentioned just hitting their front dust cap in with a hammer and it working, but that’s not my issue. I see now that they are referring to the actual...
  6. K

    Yes, another tire question v.any pics of 2” lift w/ 18” wheel/tire setup?

    Was searching 2” with 275, that’s why I wasn’t finding. Nice. I think I am going to order and call it done.
  7. K

    Yes, another tire question v.any pics of 2” lift w/ 18” wheel/tire setup?

    I can’t find any specific pics. I'm about to install an Ironman 2" Foam Cell Kit and have some new 18" wheels that I need to put tires on as well. I just don't want to have an awkward look of too small of tire. Anyone have pics to post of yours 2" lift with tire setup? Looking at some 275/70R18...
  8. K

    Side Corner Question v.difference?

    I am needing to order side corners and am running into an issue. There are two part numbers and both seem to be the same, I can't figure out the difference. 81620-60220 - Lamp Assembly 81621-60220 - Lens & Body Clearance Lamp Is there some difference I am missing...
  9. K

    Nice headlight options for LX other than OEM?

    I didn’t see any options of complete headlights with him anymore.
  10. K

    New Grille for the LX470

    Are there any other grille options out there? I’m needing to order an OEM, and before I do so wanted to see if there was anything decent.
  11. K

    Nice headlight options for LX other than OEM?

    I am rebuilding a 07 LX that has one damaged cheapo halo headlight and I don’t want to put them back in, so I am in the process of ordering new headlights. What is the route to go? BX built is too far out for me to wait and was what I think I wanted, but before I order new OEMs and retrofit my...
  12. K

    2002 LX470 pre-purchase - Deleted AHC for StrutMaster Suspension

    What is a good kit you recommend? I don’t care about budget on something like a good suspension, just want to know what some of the best setups are. Also, I originally wasn’t planning on any kind of lift but not opposed to something small. There are a few creeks on my property that a little...
  13. K

    2002 LX470 pre-purchase - Deleted AHC for StrutMaster Suspension

    No, they’re stock. Once I get it fixed, I will definitely be upgrading the entire suspension. It feels so soft driving.
  14. K

    2002 LX470 pre-purchase - Deleted AHC for StrutMaster Suspension

    I recently purchased a wrecked LX. I don’t know much about the accident other than they slid into a concrete barrier and the strutmaster suspension is brand new. It had very little dust on it, looks like just a few miles on it. Factory torsion bars. …..
Back
Top Bottom