I didn't see this posted or see a mention in the search. This guy's channel has a lot of other tests too you all might find interesting. Nice to see a $370 winch that can actually perform fairly well in these tests!
So ~2012 my friend and I bought 2 Toyota diesel conversions/clones from Marv Specter. My friend bought a green 93 HDJ80 5 speed clone. Due to kommiefornianism and Cali's air Nazis, my friend could no longer register his 80 anymore, so like a good buddy I relieved him of it since I live in...
Does anyone have a good working hood catch they'd part with that would work on my '72? The spring broke on mine and basically doesn't work. Just north of post falls Idaho.
Hey folks, do any of you happen to have one of these lying around in not so trashed shape? It's the culprit for my turn signals not working. It screws onto the turn signal switch and that little wheel that's been ground almost in half rides on a brass ring to make contact while the wheel turns...
Hey folks, finally got my May of '72 piggie wheelin and squealin again, but the hi/low headlight switch is turning into the turd in the punchbowl. I don't want to destroy the center padded button on the wheel. Does it just pop off? Screw off? Any tips on how to remove the wheel to get at the...
Getting my headliner installed, I marked and numbered my bows like you should, but I have a couple of nuts and washers zip ties to a couple of them as pictured. I forgot what those nuts and washers are for! Anyone have an idea?
I need all 4 of these plastic pieces, I'm getting my headliner installed and need them. I had all 4 and lost them like a dumbass. Please PM if you have a set.
Pretty sure the ridge is only on the cover, so put it on the back of the gear and leave the upper side open. Ill update once i put it back together all greased up!
So my rear window gear is the plastic one and has a few cracks, though it isnt busted yet. Cant get a brass one yet, so ill fix the old one, figured id show what ive done and the bits used:
Put a metal ring with screws and epoxy on the inner side, seems pretty standard. I used a 1x1.5in 18...