Recent content by JuliosLX450

Alright that makes sense. But why are the others' readings different then mine?

Running stock sender and mine reads higher then normal as well.

Holy snap...what size lift do you have? Did the rear moulding get voluntarily removed or....

Crappy....sorry I admit to not reading the whole post as it was a bit detailed (which it's a good thing). Hope the ECU swap solves the issue.

Here is a link to some starting issues troubleshooting. Have a look and hopefully you'll find your answer. Emergency Troubleshooting Procedures - FAQ Item (Recommend Keeping Copy in Truck)

some details on my tripple battery setup. This are the 2 batteries running in parallel on the PS. For the battery tray I used heavy gauge (about 1/4" thick) galvanized channel/track…..roughly 7"×13.5" You can see that I folded the corners in and bolted them. I drilled a hole in the middle...

@ Dubbinchris - here are some details on my tripple battery setup. Let me know if you'd like any more pics or info. This are the 2 batteries running in parallel on the PS. For the battery tray I used heavy gauge (about 1/4" thick) galvanized channel/track…..roughly 7"×13.5" You can see...

I'm running 2 Oddysey PC1200 in parallel. I used some HD track and modified it into a tray. Used existing threaded holes and made some brackets to fasten it down. I'm also running a National Luna dual battery controller/solenoid. I can take more pictures if you'd like.

Finally got a good main battery….Class 65. A bit tight, specially with my winch & national Luna controller….but it's in nice and snug and I'm very happy with it. Will have to fab a new tie-down down bracket

next meeting January 12?

A few weeks ago I found out the hard way what happens when you try to do a recovery on reverse...big FAIL on my part..womp Womp Womp This weekend swaped the Gears (my buddy talked me into bringing it to a shop to get them done, which was probably a good idea because it looks like it...

Hot dam man, looks like a brutal accident you had. So, I pulled the exact same move as you. Pulled the 3rd with the locker disengaged and installed it with the locker engaged. Tried a bunch of things to get rid of the light and disengage and nothing worked. Finally pulled the actuator (tried to...

fantastic info!!

It's definitely not an easy project. I'll be keeping an eye for the next update and great job thus far. thanks for replying!

Any updates on this exciting project, what became of this? I think it would be great to build my own.....something along a Hannibal/BunduAwn combo type awning would be fantabulous!!