Hello,
The windows are glued to the fiberglass top with what the manual refers to as butyl sealant. There is also an interior "sash" that reinforces the union.
In a nutshell:
Remove the interior sash.
There are four metal clips on each...
Just wrapped up the captains chair middle row mod. I started by moving the bench seat to the rear. Details on that found here:
HZJ77 - adding a 3rd row
The rear bench still folds forward, so there is still plenty of storage back there.
I...
Hi Everyone,
Just joined the Landcruiser club with a 1990 LJ73 up in the French Alps. Should have done it years ago but after having a couple of Pajeros, a 4Runner, a Nissan Patrol GR, a Landrover (never again) and a Hilux (still got it, but a...
My son has a very tidy LJ70RV Bundera but the 22R isn't exactly a powerhouse. We've been considering a diesel swap, 1KZ or similar for a while but not in front of a G52.
Then this peach popped up a non runner LJ Bundy that we've purchased...
A little dusty but here is the FTE in all its glory!
It got new OEM Toyota;
-intake manifold
-exhaust manifold
-A/C compressor
-Alternator
-Big boy OEM starter
-power steering pump
-vac pump
-Injection pump hard lines
-Lots more, see build...
So I found a low miles lx470 that I want to import but the number in the chassis starts with UZJ100….. the title , vin behind the windscreen and door tag start different ? Last 7 are the same but the first is only different on the frame . Since...
Ok the 3B is fixed!
So I was fully convinced either the injector pump had failed or the timing gears had somehow failed.
I was about to start pulling half the car apart and I thought I better ring the injector shop first to check how long their...
Being flat towed is not going to put enough strain on anything to wear it out any sooner.
Odds are they towed it south for the winter and drove the truck while they lived there for the winter, then towed it home and drove it.
Who owns a large...
Here is a semi-float Tacoma/120/150 Series hub that is being set up for a larger CV joint w/ manual hub (for various reasons). The same process can be applied to the 200 Series hub, with something similar for the rear.
I have a Advance Adapter kit to bolt a TH350 transmission to a Toyota 19 spline split transfer case used in the 60 and 70 series land cruiser models . Bought this for a project that never happened so my loss is your gain as this lists for 794$...
There is a “flat tow an LX am I crazy” thread. Start there. Early model years support this, but the instructions on how to do it disappeared after 2011 or 2013 though it might still work. TBD whether it’ll damage something… seemed not to in...
So we are probably upgrading soon from our TC camper in the dually to a super C and I thought it would be nice to take a 200 with us on longer trips now that prices on the early models are coming back to what they where 4 years and 50k miles ago...
So there are several different transmissions available in our 70 series and each one uses a different crossmember at a slightly different location . No difference between lhd or rhd nor the different wheelbase variants . Probably best to start...
There are several different transmission offered in the 7x models and most of them use a different crossmember at a different location . I would start with getting one for the H55 models as these are the most common . It doesn't matter what...
Would a 99+ not fit your truck?
Kind of silly that we need to get these from Aus. @Nottajeep is trying to put together a group buy from BudBuilt for a transfer case skid:
https://forum.ih8mud.com/threads/budbuilt-skid-plate.1333995/
I'm hoping...
With the current USD / AUD exchange rate it was a good time to place an order. These skid plates will come in handy on my weekly trip to Walmart. 😊
** Photo courtesy of Odd Iron Off Road