Recent content by jameyFL

Reduced, as its been a while and no bites. Also it needs a carb fan.

The seat covers were imported to city racer llc from argentina before things went bad there... pretty sure i bought one of the last sets.

Well, i read all the threads here I could find and it seemed to indicate the dome light fuse was the correct one. it was blown so i replaced. i have dome lights but no fan :D I also have discovered the relay/sensor that clips onto the manifold has gone missing so that explains a lot.

still available, however i need to replace the carb fan as it is having hot start issues. cold starts are perfect. can negotiate price accordingly

rest of under carriage

Engine & under

doh! on it... gimme a few...

1985 Toyota Land Cruiser FJ-60 $16,000 obo $12,000 obo (hasn't sold for a month or so now and further reduced because it needs a carb fan apparently) I acquired this truck in late 2016 from a seller in sw FL with 210k original miles. I rebuilt the engine shortly after purchase and have put...

If you have the tan interior I am looking for a fuse panel for my 85 60. Also interested in a stock radio.

Just wanted to share our experiences towing recently. Stock 2016 which has the 8 speed transmission. We have a new 6k lbs camper and the LC is our new (to us) tow vehicle. We were in a suburban previously. Blue Ox hitch, which I highly recommend. I didn't use power mode and was traveling west...

The manual brake lever is useful when the trailer starts swaying. e.g. you pass a semi or don't watch your speed and go to fast and the trailer starts wobbling. Basically brake the trailer with the lever, but not your truck, and the entire rig goes straight as an arrow.

Exact same place as my old suburban :) you do have to reach... Possibly a topic for a different thread, I noticed that the manual says it uses the same mechanism for ATRAC, etc for some kind of sway control. While you are towing it can detect sway and apply pressure to only certain wheels etc...

Good thread. I wanted to post a summary of the many threads above and show how I mounted a P2 in a 2016 with a pool noodle and zip ties. Tools: Philips head screwdriver 10mm socket wrench Drill 1. remove bottom panel (2 screws, 3 clips, 2 wire connectors) 2. remove upper panel (2 10mm bolts...

are B-pillars those cheap plastic things that hide your front seat belts? if so I need some of those also....