Recent content by garrett goodwin

  1. garrett goodwin

    For Sale 88/89 Auto Trans

    Bump
  2. garrett goodwin

    Wanted 3FE Alternator bracket and bolts

    Do you have the bracket though? I’m missing the entire bracket and hardware
  3. garrett goodwin

    Wanted 3FE Alternator bracket and bolts

    Bump. I am guessing I need an 89/90 bracket. I know it is not an 88 as the wiring harness I have it not that year. Any help is appreciated.
  4. IMG_1724.jpg

    IMG_1724.jpg

  5. garrett goodwin

    3FE ECU Wiring

    So I am working on putting a 89/90 3FE into my 82 60 and i was labeling the portion of the eco with the most pins. On the bottom row, if it was plugged in, I have wires where it states I should not have any. Can someone help me out on this? Attached are photos of what I have and what I am using...
  6. garrett goodwin

    3FE Harness into 60

    I am in the middle of installing an 89/90 3FE into my 82 60. I have the motor installed and am starting the daunting task of dealing with the wiring harness. I have an entire 3FE harness but am contemplating on just removing the cowl harness that connects into the ECU from the 3FE and just...
  7. garrett goodwin

    Wanted 3FE Alternator bracket and bolts

    62. I honestly don’t have a clue. The number was rusted out and beyond recognition. Is there a way to tell? Installing the motor in my 82 60
  8. garrett goodwin

    VintgeTEqParts FJ / BJ / HJ 60 / 62 Series Technical Solutions ........

    Here is a photo of the pulley and bracket. The bolt goes through the hole on the left side of the bracket and into the block which is held in place by the bolt in the pulley. I can get a measurement of the bolt if need be.
  9. garrett goodwin

    Wanted 3FE Alternator bracket and bolts

    Honestly don't even know what its worth? I know SOR charges close to 100 bucks for their used stuff but always feel that they are way over priced.
  10. garrett goodwin

    Wanted  3FE Alternator bracket and bolts

    I am in need of the bracket to hold the top end of the alternator and all of the associated hardware. Let me know if you have one laying around
  11. garrett goodwin

    VintgeTEqParts FJ / BJ / HJ 60 / 62 Series Technical Solutions ........

    Do these bolts also work for the idler pulley on the 3FE?
  12. garrett goodwin

    Wiring help

    Here are some photos of the pins that are on the connector.
  13. garrett goodwin

    Wiring help

    Can I buy these off your site?
  14. garrett goodwin

    Wiring help

    I am confusing everyone now I think. Lol. It’s the pins that I can’t find. The connector works well just need the pins so I can reconnect the wires. It was mainly the big chunk of wire I was trying to find a cure for
Top Bottom