Recent content by Flovalflyer

I wasn’t able to easily track down the NSK bearing in stock state side but was able to find it inexpensively at Partsouq. Shipping will be a few bucks if you don’t combine with other things but I was planning an order anyway. Arrived quickly and is an exact match...

Can anyone verify Toyota OEM part numbers for the bearing that is pressed into the input shaft housing? I see 9036319007 and 9036319002 mentioned and they both come up as bearing for power steering support, upper. Anyone have experience? Also, trying to track down a US supplier for nsk 19bsw05...

What info can anyone give on the Aisin 47201-60540 brake master cylinder? I have a US spec ‘94 w/ ABS and looking to delete ABS and go manual proportioning rather than LSPV. In searching I have seen potential for that MC to have a drum brake residual valve and others that say it will work with 4...

Link to the survey by Toyota Japan for the heritage parts project. You can put in the fj80 and FZJ80 as “other”. Never too early to start asking for continued OEM parts manufacturing and currently discontinued items! https://www.toyota.co.jp/cmpnform/pub/co/landcruiser_form_en

Looking to see if anyone else has installed these and has data on changes in engine/under hood temps? What’s the current consensus on their effectiveness?

What is the current thinking for HD tie rods and drag links for stock steering configuration? Any recommendations on suppliers? I see Slee and Front Range have them. Any others I should check out? Do the upgraded ones use stock size rod ends? Are the aftermarket ones able to take more abuse and...

@NLXTACY thanks!

Perfect. So just the one ball valve that is cable actuated and on the 5/8 heater hose on the engine bay side of the firewall.

I need to flush my heater core with no power and no motor in the wagon. My question: I know there is the mechanical cable actuated valve that mounts on the firewall. Are there any other valves (electric?) in the short loop that makes up the two hoses in the firewall and the heater core? I...

Yes copy! How far out of center was your axle? Did you notice any handling difference after installing?

Quick search didn’t seem to bring up much relevant. How do you know when you need a front adjustable panhard rod? I’m running about a 4” lift with Slee arms and the Delta rear panhard bracket. No real handling quirks that I can point to just drives like a lifted wagon on 37s. What are people’s...

Thanks Adam- that’s what I was looking for. Correct me if I’m wrong but are the Icon/Slinky the only bolt on external bypass available?

Hey all, What’s the current selection of top shelf 80 series bolt on shocks? I keep coming back to Slinky stage 5 with bypass and adjustable compression/rebound dampening but want to see what else is out there at this time that is comparable. I’ve seen Fox mentioned a few places but can’t locate...

Think I answered my own question - was able to find diagram at Partsouk...

Howdy- 94 80 series. Working on install of a 4Crawler body lift and would like to replace the solid metal “tubes” that run through the rubber cushions on the 2,3,&4 mounts. Can anyone help me out with OEM part numbers, locations, and quantities for the tubes? I see two part numbers that look...