Hey all,
So for some time my 94 cruiser has had this issue. Starter will click when engaged but no start. I could turn the key about 15 times then it would start. Has taken more lately.
New denso 2k starter installed. Problem followed.
New starter power cable, new ground to block, and new...
Lol really. It's that simple? I cant say that I've ever done this on my 80 before but I can go pull the caps off the other 5 cars in my driveway and NONE of them do it.
Hey all,
Like the title states, the truck was cold and I was looking around the engine as it was warming up, decided to pull the oil cap and as soon as it cleared the last thread the idle dropped hard almost stalled. As soon as the cap was threaded back in it came back. Any idea on this? I've...
ICON 3" shocks and spring. About 10k miles light use. Will include radius arms with caster correcting bushings. Will not ship. $1000 or trade for small roof top tent.
Thank you gummycarbs! Found #4 not firing. Had spark. Looked closer and found the injector unplugged. I did not remove this during my install. Pulled the throttle body off to get a better look, seems the previous owner had broken the tab off the connector.
I didnt mess with the injectors so I would guess they are in the same state as when I started. I am gonna go pull the plug wires one at a time now. I will double check the intake hose but mine is in pretty good shape for its age.
Did the valve cover gasket on my 94 and now it seems like it's running on 5 cylinders.
Also did plugs, wires, cap, and rotor while I was there.
I've gone over it 3 times and even swapped back to old cap and wires. Everything is plugged in.
It idles rough and sputters when driving. Definitely...
I've got a 94 80 series. Truck had been running fine. I haven't driven or started it in about two weeks. It has a CEL light for EGR temp sensor for a long time now with no issues. I started the truck and it didn't do its normal cold start high rev, it went strait to about 6-700 RPM. Has...
Well a few people on this thread have stated stock height to be F21.25" and R20.5" I believe I'm a bit under 3". With what the thread had spelled out the seems the C97-146/147 would be a good 3-4" lift with my current weight. Already have all the extended lines, looks like I just need to order a...
Tons of good info. Thank you. I'm seeing the word heavy used but no actual weights. I'm right around 6k full armor 10k winch 35" spare and by reading I'm guessing I would see a solid +3". I'm currently running the icon "stage1" its says it's a 3" but I'm seeing 23" hub to fender on all four...