euclid's latest activity

Just a quick update to this thread. I recently imported an HDJ81 JDM and it had the EGR turbo intake. After some research, there are different emissions and regulations throughout different provinces/prefects in Japan. Some of these have more...

My 1995 JDM HDJ1 1HD-FT came in with EGR stuff

Agreed on both of your comments... I have went deep-diving on this air intake heater and bolt terminal, and have a Gordian knot type solution for now, to possibly revisit in the fall. But first I'll recount what I've learned, since I've found...

The The shop that rebuilt my pump sourced the necessary rebuild parts for the pump. Same for injectors.

hi I own a 1995 HDJ81 (1HD-FT) and the something from the valve train fell into the engine and had to rebuild whole engine. according to my local garage, valve clips need to be inspected for wear and tear and replaced immediately when...

Seem really elementary like I’m missing something obvious but I cant find documentation anywhere on which valves are intake and which ones are exhaust. The FSM sheet above is what i’m working with I’ve been digging for an hour online. What am...

See o-ring in pic here. Headed to Napa to see if i can source from shelf. Can’t find it mentioned anywhere.

Well, in case anyone is curious, the correct-ish size is 18mm inside diameter x 2.5mm material width. And hopefully the viton will hold up better than the OEM rings.

Parts diargram doesn’t show an 0-ring where i circled in red on the parts diagram but my injectors have a small o-ring there. Anyone have any ideas on the part number for this o-ring?

If there is a bunch of interest, I have 3 more 80 bumpers in similar condition available after @chbrow10 sells.

new toy

wicked socks bro

Socks match the “vibe.” 😂😂🍄‍🍄

They are my homies.

Life is short friends. Get out there and do shǐt. Before you know it, you are fũcking dead. And everything else continues on as if you never existed.

What day is it? Past three days went like this. I think. 😂😂

Day 1 photo dump. DV to Rhyolite through the Sarcatabus Flats basın. Epic in all regards.

8L of water test ride. 2L on each fork, 3L bladder in frame bag, and 1L on down tube. Adds about an extra 20lbs. Quick 10 miler up the mountain and back. Success. Everything stayed on and attached. Now to take everything off for...

Some photos from DV trips doing LC shǐt back in the day…

Been a while since I’ve done a MUD trip report, but you guys are the best and I know a lot of you like the desert. Heading out for two weeks in Death Valley doing desert rat shǐt. Bikepacking/hot springing/hiking/Toyota off road shît. Just...

Bump still looking.

Cross posting for future reference @davegonz has a good list of suppliers for the rebuild kit https://forum.ih8mud.com/threads/source-for-melett-turbo-rebuild-kits.1059193/

@davegonz FTW!!!! thanks homie. gonna cross post this thread to the one i started. Melett.com makes it tough to find distributtors. G Pop Shop | Turbo Rebuids Upgrades Parts - https://gpopshop.com/ had the kit on the shelf and shiped it out asap.

Found a couple more: G-Pop Shop: Family owned shop in Arkansas. They even had free ground shipping. https://gpopshop.com/ Majestic Turbo Waco: They can get the Melett kits. Majestic Turbo Waco Melett Toyota Turbo info...

Well, found one. I emailed them and they confirmed that they use Melett kits from the UK. Toyota Turbo Rebuild Kits | Turbocharger Rebuild Kits